Jump to content
SAU Community

Is it possible to compliance a 260rs?

Intensevil
 Share

Recommended Posts

Intensevil Community Regular

Intensevil

Posted
Posted

My cousin and I hold differing views on this. He reckons its extremly hard because some guy that works at an importer place told him because they ahve rb26dett's that they are extremely difficult to compliance and that there are only 2 in australia.

But since rb26dett's were available in the r32 gtr that was locally sold, isn't it just a case of making it match the emissions that the r32 had met? Or am i missing something here

Link to comment
https://www.sau.com.au/forums/topic/38972-is-it-possible-to-compliance-a-260rs/
Share on other sites
jake32 Mentor

jake32

Posted
Posted
My cousin and I hold differing views on this. He reckons its extremly hard because some guy that works at an importer place told him because they ahve rb26dett's that they are extremely difficult to compliance and that there are only 2 in australia.

But since rb26dett's were available in the r32 gtr that was locally sold, isn't it just a case of making it match the emissions that the r32 had met? Or am i missing something here

rb26 in stagea has different emission test to any other rb26 due to exhaust system differrences..pipe length,muffler part # etc..actually closer to r34 emmision std but untill some one with stagea compliance has autech version tested ..then yes it is difficult...but i`am sure emission evidence for 260 rs can not be to far away

  • 1 month later...
concrete8@bigpond.co Apprentice

[email protected]

Posted
Posted
rb26 in stagea has different emission test to any other rb26 due to exhaust system differrences..pipe length,muffler part # etc..actually closer to r34 emmision std but untill some one with  stagea compliance has autech version tested ..then yes it is difficult...but i`am sure emission  evidence for 260 rs can not be to far away

I have imported a 260RS it is still awaiting compliance and yes it is emissions that is the hold up, it will be the first stagea autech to be reg in australia. i know there are two more in the country but they have to wait like l do for the testing to be completed

concrete8@bigpond.co Apprentice

[email protected]

Posted
Posted

I have imported a 260RS it is still awaiting compliance and yes it is emissions that is the hold up, it will be the first stagea autech to be reg in australia. i know there are two more in the country but they have to wait like l do for the testing to be completed

xRHETTx Mentor

xRHETTx

Posted
Posted
I have imported a 260RS it is still awaiting compliance and yes it is emissions that is the hold up, it will be the first stagea autech to be reg in australia. i know there are two more in the country but they have to wait like l do for the testing to be completed

Sorry, but there is definately a 260RS in melbourne already. It came in under the old import scheme though, if that's what you mean about yours being the first under the new scheme.

There was a write-up on it in HPI a few years ago.

Duncan Grand Master

Duncan

Posted
Posted

Actually the one in HPI was from C-red in Perth. I'm pretty sure the one in Melb came in under race rego, it competed in the grand prix rally in 2002. Good to see a few of them around, must get one myself :(

concrete8@bigpond.co Apprentice

[email protected]

Posted
Posted
Sorry, but there is definately a 260RS in melbourne already.  It came in under the old import scheme though, if that's what you mean about yours being the first under the new scheme.

There was a write-up on it in HPI a few years ago.

the C-Red Stagea is a 2.5 and is registered, the white 260RS in Melbourne which came in through Success motors (now Closed) is not registered. Can anyone prove there is a 260RS Autech Version Registered in Australia

concrete8@bigpond.co Apprentice

[email protected]

Posted
Posted
no its in japan ..bought at auction on friday...intend to use as sample car for raws

the 98 autech from motorman is the sample car, and compliance should have been completed on friday 28th May, so your car will not need to be a sample .

which year did you get, any mods?

jake32 Mentor

jake32

Posted
Posted
the 98 autech from motorman is the sample car, and compliance should have been completed on friday 28th May, so your car will not need to be a sample .

which year did you get, any mods?

it will be a sample car for my own compliance company..every raw needs sample car of what they intend to comply..no actual testing of this car will be done as evidence for this model is nearly complete..as you mentioned

its a 98 model ..

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...