Jump to content
SAU Community

Recommended Posts

My cousin and I hold differing views on this. He reckons its extremly hard because some guy that works at an importer place told him because they ahve rb26dett's that they are extremely difficult to compliance and that there are only 2 in australia.

But since rb26dett's were available in the r32 gtr that was locally sold, isn't it just a case of making it match the emissions that the r32 had met? Or am i missing something here

Link to comment
https://www.sau.com.au/forums/topic/38972-is-it-possible-to-compliance-a-260rs/
Share on other sites

My cousin and I hold differing views on this. He reckons its extremly hard because some guy that works at an importer place told him because they ahve rb26dett's that they are extremely difficult to compliance and that there are only 2 in australia.

But since rb26dett's were available in the r32 gtr that was locally sold, isn't it just a case of making it match the emissions that the r32 had met? Or am i missing something here

rb26 in stagea has different emission test to any other rb26 due to exhaust system differrences..pipe length,muffler part # etc..actually closer to r34 emmision std but untill some one with stagea compliance has autech version tested ..then yes it is difficult...but i`am sure emission evidence for 260 rs can not be to far away

  • 1 month later...
rb26 in stagea has different emission test to any other rb26 due to exhaust system differrences..pipe length,muffler part # etc..actually closer to r34 emmision std but untill some one with  stagea compliance has autech version tested ..then yes it is difficult...but i`am sure emission  evidence for 260 rs can not be to far away

I have imported a 260RS it is still awaiting compliance and yes it is emissions that is the hold up, it will be the first stagea autech to be reg in australia. i know there are two more in the country but they have to wait like l do for the testing to be completed

I have imported a 260RS it is still awaiting compliance and yes it is emissions that is the hold up, it will be the first stagea autech to be reg in australia. i know there are two more in the country but they have to wait like l do for the testing to be completed

I have imported a 260RS it is still awaiting compliance and yes it is emissions that is the hold up, it will be the first stagea autech to be reg in australia. i know there are two more in the country but they have to wait like l do for the testing to be completed

Sorry, but there is definately a 260RS in melbourne already. It came in under the old import scheme though, if that's what you mean about yours being the first under the new scheme.

There was a write-up on it in HPI a few years ago.

Actually the one in HPI was from C-red in Perth. I'm pretty sure the one in Melb came in under race rego, it competed in the grand prix rally in 2002. Good to see a few of them around, must get one myself :(

Sorry, but there is definately a 260RS in melbourne already.  It came in under the old import scheme though, if that's what you mean about yours being the first under the new scheme.

There was a write-up on it in HPI a few years ago.

the C-Red Stagea is a 2.5 and is registered, the white 260RS in Melbourne which came in through Success motors (now Closed) is not registered. Can anyone prove there is a 260RS Autech Version Registered in Australia

no its in japan ..bought at auction on friday...intend to use as sample car for raws

the 98 autech from motorman is the sample car, and compliance should have been completed on friday 28th May, so your car will not need to be a sample .

which year did you get, any mods?

the 98 autech from motorman is the sample car, and compliance should have been completed on friday 28th May, so your car will not need to be a sample .

which year did you get, any mods?

it will be a sample car for my own compliance company..every raw needs sample car of what they intend to comply..no actual testing of this car will be done as evidence for this model is nearly complete..as you mentioned

its a 98 model ..

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...