Jump to content
SAU Community

Recommended Posts

I know this is going to sound really silly so apologies in advance ... :Oops:

will stereo gear (headunit, amp, speakers, sub) work fine if you buy them from overseas? or is there some silly power or frequency thing I should be worried about?

again ... I have NFI I admit. That's why I ask :cheers:

Link to comment
https://www.sau.com.au/forums/topic/39090-audio-gear-bought-overseas/
Share on other sites

The only problem ull have is if the headunit was brought in japan etc...the fm frequency isnt the same here but u can still get around it with a fm frequency expander...then ull be able to pick up the aus fm stations.....am will work ok...so ull be able to get everything workin fine

yeah where abouts are you buying everything from? but everything should work fine its only when you get a japanese cassette deck when you might have issues i know a few people who have got cd player and cassette deck cd's and everything were fine but couldn't use tapes but don't really need them anymore

dunno havent really sat down and calculated all that accuratly...

but some headunits that go for say $1500 Aus can be bought from the USA for $380-$410 when I look around on online shops. Surely taxes and shipping cant add up to a thousand bucks can they???? *dont think so* :(

dark coupe ,

as far as warranty goes make sure you let the shop u r buying the gear from you are going back to aus with the gear and request an international warranty with the gear. i bought a kenwood cd player from the us had an international warrannty and when i had troules with it i was covered.

Regards

Brad

I was in hawaii on a holiday a few years back saw some gear and decided to buy it..

If you are in sydney have a look at these guys http://www.fhrxstudios.com/ they seem to support the forum members and hell there prices look good.

Sometimes you have to take into account that you may be getting something cheap overseas but you really get no after sales service at all.

I mean if you purchase locally and deal with someone that looks after you that could far outway the savings you might make overseas.

I understand that modifying cars can become very expensive as i have done a few in my time and am currently working on a 32 gtr but i have found that a little bit of loyalty as far as purchasing equipment mechanical and or audio can save you a lot of money later on in the picture with some of these guys really looking after you on price etc or doing that extra little bit to help you out.

Regards

Brad

Hey mate,

Was overseas in Singapore & Hong Kong early this year, and the stuff there such as screens/decks/amps are WAAAAYYY cheaper than Aus. For example, top of the range pioneer screen with dvd 6.5", Aus $1800 without bargaining. Usually these guys in asia you can bargain with.

The stereo's bought from Jap, all you need to do is buy the freqency modulator, which is around $30 or $40 aus.

Cheers

Hey mate,

Was overseas in Singapore & Hong Kong early this year, and the stuff there such as screens/decks/amps are WAAAAYYY cheaper than Aus. For example, top of the range pioneer screen with dvd 6.5", Aus $1800 without bargaining. Usually these guys in asia you can bargain with.

The stereo's bought from Jap, all you need to do is buy the freqency modulator, which is around $30 or $40 aus.

Cheers

singapore won't give a warranty thats where i get most of my audio from and if it breaks down your in a bit of trouble....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...