Jump to content
SAU Community

Whats With The V8S These Days

Co-stan-za

By Co-stan-za,
in Western Australia

 Share

Recommended Posts

Peterbdonaldson Newbie

Peterbdonaldson

Posted
Posted

I dont blame you, i recently had a problem with my tune which i couldn't afford to fix, so she was pulsing. to which a cop pulled me over and got me with a yellow sticker, for things that have never been targeted before. I was very upset explained i couldn't fix these problems, she continued to tell me "well your just gonna have to sell it then", i looked at her with a dumb look "are you serious with a sticker like that on it i couldnt possibly sell it", she smiled and said "not my problem".

I'm an honest hard working citizen, yet because i drive a GTR around as a daily, its suddenly a crime.

That isn't even the best part, a foolish man in his WRX drove past hi-revving in low gears up to the lights with 50m of us, then proceeded to takeoff going sideways. My brother who was in the passenger seat told me he knew the guy and he has been sticker-ed 3 times. when i told the officer that she replied with "if i hadn't pulled you over i would be dealing with him"

If i could drive my xr6 around the streets i wouldnt be so pissed about these bs brand new commonwhores or falcoons doing burnouts in a packed carpark and getting away with it. although i just dont have the money to fix it, and save my poor GTR for the track. Yet they have the money to waste their "stockies" on the rear on a daily.

meat Collaborator

meat

Posted
Posted

The thing that amuses me the most, is how much ALL import owners complain about this shit.

You have seen the amount of people who also own imports who are 'bogans' or just complete dickheads and do the exact same shit that other 'bogans' and complete dickheads do in their v8s. People from both sides of this "fued" I suppose you'd call it, challenge each other or try to provoke stupid acts from each other.

We also all KNOW that owning an import usually brings unwanted attention from the police.

If you can't handle your shit, keep your car to a track or dont own one.

In regards to the above poster, why were you driving it around with known problems?

elestrik Apprentice

elestrik

Posted
Posted
1331348851[/url]' post='6268998']

The thing that amuses me the most, is how much ALL import owners complain about this shit.

You have seen the amount of people who also own imports who are 'bogans' or just complete dickheads and do the exact same shit that other 'bogans' and complete dickheads do in their v8s. People from both sides of this "fued" I suppose you'd call it, challenge each other or try to provoke stupid acts from each other.

We also all KNOW that owning an import usually brings unwanted attention from the police.

If you can't handle your shit, keep your car to a track or dont own one.

In regards to the above poster, why were you driving it around with known problems?

Sorry slash but you get constant or even mild harrasment by the police or bias attention and see if you may hve the same mind set after or while your going through it plus my main reason I post is because I don't think it's fair when your godly given rights and free choice come under scrutineer in this country and you get targeted because of your free choice of vehicle you choose to drive,it is unjustifiable , a form of harrasment and un australian.There is other problems that hve just labeled the whole import scene as goons hoons and gollywogs etc but why put the whole import scene driver in the whole same bucket?..there can be shit thrown around all day but alot of people know that import driver will get pinged 9 times outa 10 over any other car and there will be a day when imports will be a thing of the past an not seen on roads unsure.gif

TrikkBen Contributor

TrikkBen

Posted
Posted

It comes from both sides. Having come from driving a VYSII Clubsport, I had to deal with dickheads in V8's and Imports trying to race and on the funnier occasions, V6 with the most mang exhaust and stupid wheels lol, Now I drive a Mazda Bravo TD as my daily, no one tries to race me, I don't even get a second glance in it...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • Matt Z
      SAU NSW - Bathurst Run 2025

      By Matt Z · Posted

      🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • soviet_merlin
      My BMW E39 528i touring

      By soviet_merlin · Posted

      What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
    • OST Micah
      RH9 R32 GTR Build Thread

      By OST Micah · Posted

      While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
×
×
  • Create New...