Jump to content
SAU Community

Recommended Posts

People,

Need some help as this noise is driving me insane...

I have a standard clutch done a little bit now...

The problem is that the pressing the pedal previously would reveal a squak only intermittently.

Now it has progressed to quiet a number of times on an outing, both pressing and realeasing the pedal...

I used some silicone lubcricant (ska don't get any funny ideas) on the lever on the side of the gearbox. This stuff is what I used on my motorbike chain and is a VERY good lubricant, yet the problem still persists.

Any help would be appreaciated!!!

Thanks

Neill

Link to comment
https://www.sau.com.au/forums/topic/39166-squeaky-clutch/
Share on other sites

i had/have this problem also.. i tried wd40 or similar under the pedal where the cable is and no change. then i accidentaly oversprayed the spring behind the pedal up the top and the squeak stopped straight away!! came back a few weeks ago but i drenched it in wd40 again and i havent heard a mouse since!

see how you go..

Link to comment
https://www.sau.com.au/forums/topic/39166-squeaky-clutch/#findComment-797351
Share on other sites

i know what this is, i had the same problem, its the slave cylinder.

look under the car at the cylinder while a friend pushes the clutch, and as the piston moves in and out it will make the squeek noise...

if you want it to go away, replace the cylinder.. although it problably wont amount to much if left unfixed.

Link to comment
https://www.sau.com.au/forums/topic/39166-squeaky-clutch/#findComment-797653
Share on other sites

Slave cylinder hey, I will have to check that again cause it has been recently replaced...

Its driving me nuts I will investigate more on Sat when I can get it up on a hoist...and I tried drowning it in WD40 to no avail, also where is this spring...

And definitely the outside of the car, had the girl push the clutch when I had it on ramps...

Link to comment
https://www.sau.com.au/forums/topic/39166-squeaky-clutch/#findComment-797701
Share on other sites

hey guys,

My clutch had the squeek 6 mths after fitting, took it back and they got under the car, removed the rubber boot and sprayed some type of lube on the clutch lever pivot point, all sweet now and the clutch actually feels a bit easyer to press in..  

cheers

Lenno

Hmmm might try that tomorrow!!!

Link to comment
https://www.sau.com.au/forums/topic/39166-squeaky-clutch/#findComment-798047
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...