Jump to content
SAU Community

Recommended Posts

Yeah, my cruising speed is considered 2krpm or lower. Its the standard dash gauge. It goes up fine to about 4 when moving and higher when its higher up in the revs.

should be fine then.

been thining about switching to Penrite as well, I use it in my other cars and its great stuff and about half the price of motul so can change it more frequently.

Ive only put it in my 33 diff and it feels good..think I will just go with the HPR 10, 10-50...think its good for ethanol too yeah

hoiw much is the ten tenths stuff?

i paid $79.95 at a local store for the 5w-60. can probably be gotten cheaper elsewhere but i was in a hurry

In a stock motor anything under 10w40 is a bit thin. Built motor I wouldnt use anything under 15w50.

Thats just me.

Same here that's exactly what I've been told.

I brought some 100% syn 20w 50 amsoil for $80. I get 600kpa when cold on idol, and when warm it's usually 80-100kpa above revs. Eg 2k revs is 280kpa oil press (40psi). it's thinner than the 10w40 & 25w50 oils I have seen (cold) and my car rb20 seems really happy on it. It's the same as their race oil but AMS say it's good for 30,000ks in a new vehicle.

Edited by HYBR3D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
×
×
  • Create New...