Jump to content
SAU Community

Recommended Posts

Hi all, am clearing out the garage of some unwanted stuff.

All items are pick-up preferred from Warrnambool Vic. Can post smaller stuff at buyers expense. Can also deliver or meet buyer half way at buyers expense.

PM, post here or text 04 3774 5147 for more information any questions etc.

I am unable to post photos at this time as the camera I have takes 4mb+ photos. I can however MMS photos.

1. Assorted EMPTY tool cases for the following Sidchrome 3/8" and 1/2" socket sets, Repco 1/4" socket set, Stanley screwdriver set, EMPTY spanner rolls for Sidchrome ring-open-end, ring, double-open-end spanner sets.

>>>>ALL CASES ARE EMPTY<<<<<

$20 the lot

2. Nakamachi? CD player, came with car, working condition.

$5

3. Exedy clutch kit, good condition, only removed/replaced due to noisy spigot bush and didn't ant to get caught out. Part number on pressure plate is NSC 534. Came out of R33 GTS.

$50

4. Stock coils. Suit diagnosing dead miss etc. Out of series 1 R33 GTS

$10

5. Stock dump/front pipe suit R33 GTST

$10

6. Stock thermofan, removed to fit FMIC, HAS BEEN MODIFIED

$10

7. Stock Jecs fuel pump from R33 GTS, unknown condition

$5

8. Stock intake/rubber pipe and crossover pipe

$10

9. Genuine Mazda RX8 rotary oil and filter suit RX8

$20

10. Speco Meter oil pressure gauge, think it's 2.5", has sender

$10

11. Stock Mazda RX8 spare wheel, unused, has leather cover

$10

12. Ryobi mitre saw, part number EMS 1221, 1200w, 210mm, braely used, still in box with accessories. Paid $130

$30

13. Stock springs and shocks from R33 GTS

$20 the lot

14. Assorted EMPTY Snap-On tool cases, part numbers CTSA561CL, CTSA561, CTA4850, CDRA6850, suits 1/2" electric rattle gun, cordless drill, cordless bit-driver, and 3/8" rattle gun CASES ARE EMPTY

$20 the lot

15. Stock swaybars from R33 GTS

$20 pair

16. 2 BCT S600 tyres, 205/55/R16, flat spotted, camber wear, suit skids

$20 pair

Will post photos if I can find a camera that takes a smaller file size. Will also add itmes as I find them.

  • 4 weeks later...

Also for sale:

2 Pioneer GMD7400M monoblock amplifiers

2 Eclipse SW6010 10" subwoofers

Currently in car and can be heard running, one sub has had the surround re-glued to the basket over a year ago, good working order had no issues since.

Selling as a package for $400, pick-up or arrange a meeting place etc only.

2 subs and 2 amps as pictured:

(sorry for the poor picture)

post-74990-0-90776000-1332545874_thumb.jpg

  • 2 weeks later...
  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...