Jump to content
SAU Community

Recommended Posts

Hi all its time to part with my gtr but all for a good cause to buy a house so here it goes.

$25000 Neg

The car is a 1989 R32 gtr skyline with a fresh built that Paul from Red R racing put together here are the details.

R34 gtr crank

CP 40 thou pistons with modified eagle rods

Hks oil pump and trust sump with modified oil return and restrictor fitted

Tomei Pon cam type b's and valve springs and retainers

tomei adjustable cam gears

spit fire coil packs

2860-5 turbos with r34 gtr stainless dumps and veil side front pipe and a varex muffler

The car produced 430 hp at the wheels with a Guilt toy tune. There is plenty more left in it with a less restrictive exhaust.

The car is also fitted with 18*9 +15 lenso DR1 rims.

JJR adjustable camber arms front and rear with bilstein coil overs

Top end sterio kenwood head unit, JL splits and JL rears $2000 worth alone come with sub and amp just havent gotten to fit it yet

Viper alarm is installed

there is probably other things i have forgotten to mention but feel free to hit me up

My number is 0434108477 feel free to ring me or txt me.

thanks scottie

post-71662-0-51206800-1329903943_thumb.jpg

post-71662-0-04044000-1329904056_thumb.jpg

post-71662-0-23733600-1329904107_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/392657-built-r32-gtr/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

List what ecu injectors fuel pump/ system. There is more mods to this car than what u have stated. Having a red r racing engine u know it one of the best.

Nice car and its well worth the low 20s

Link to comment
https://www.sau.com.au/forums/topic/392657-built-r32-gtr/#findComment-6247001
Share on other sites

Sorry like i said alot to list it has and cheers i think i have priced it fairly like i said i am negotiable oh and the motor is 8 000km old

HKS 1000cc injectors bosch 040 fuel pump and a power fc with hand controller

Link to comment
https://www.sau.com.au/forums/topic/392657-built-r32-gtr/#findComment-6247010
Share on other sites

Long engine alone is well worth half the asking price. Plus all the bolt ons someone wil get a good car by the look of it.

I have 2 gtrs if I didn't already or had a spare lump of cash would buy this just to save on the engine hastles of an unbuilt engine or unreliable engine built by some shop that don't know the rb engines.

Paul is one of if not the best rb engine builder in the country in my opinion.

Good luck with your sale ill spread the word of a quality gtr for sale

Link to comment
https://www.sau.com.au/forums/topic/392657-built-r32-gtr/#findComment-6247270
Share on other sites

hi it is running 21 psi atm and the turbos where brand new when the motor was built so they have 8000km on them they also have the oil restrictor fitted in the banjo lines to. goz1llaaa34 yes there is alittle bit of rust i will post some photos for you tonight and interior pics will be put up as well thanks for the interest guys

Link to comment
https://www.sau.com.au/forums/topic/392657-built-r32-gtr/#findComment-6247366
Share on other sites

Thanks mate, does the air con work ?

Hey sorry mate air con does work but needs to be re gassed which i can organise it to be done and here is acouple of interior pics

post-71662-0-70792300-1329986252_thumb.jpg

post-71662-0-83735900-1329986274_thumb.jpg

post-71662-0-04797800-1329986392_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/392657-built-r32-gtr/#findComment-6248436
Share on other sites

Could you please tell me where exactly are the rust spots? So that I will have a clue. PM me if you like...

heya sorry mate i completely forgot about that here are a couple of photosof the rust. the rest of the body is straightas with only like 2 noticeable dints. There no rust in the sills or under body at all. I was quoted $3000 for the rust repairs with all the windows removed rust plated and the roof and rear quarters repainted. Other than that and the front seats being average the car is in very good condition and i forgot to add it has a Jim berry single plate custom clutch also which i would have to say is the best clutch i have driven.

post-71662-0-02653100-1330332118_thumb.jpg

post-71662-0-73263800-1330332149_thumb.jpg

post-71662-0-84609200-1330332171_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/392657-built-r32-gtr/#findComment-6253182
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...