Jump to content
SAU Community

Headtorque

t_revz

By t_revz,
in Western Australia

 Share

Recommended Posts

t_revz Grand Master

t_revz

Posted
Posted

Had a chat with Gerry a little while back about flow benching my head after i finish porting it, after a brief chat i realised i would get them to do all the head work as they know their shit and RB heads are done there on a weekly basis.

i went to Perth yesterday and took up my head and parts to suit. not sure if it was just because it was a saturday but 2 guys took an hour out of their time to discuss with me my intended output and all the modifications they recommended to do a good job. there was no pressure to spend lots and everything was explained in detail. they showed me around the workshop and got to see a dozen port jobs on various heads and i was blown away at the quality compared to the crap i had done to mine :whistling:

pricing was good too and as they do so many RB heads they said they would swap out any lifters with the wrong lash with spares they have. i can also swap the valve stem seals i got in the gasket kit for the better ones they are going to use.

Gerry is very helpful on the phone and worth talking to if your considering any head work. im looking forward to seeing the final result :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/392975-headtorque/
Share on other sites
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • PranK
      Most women will agree that parking is the most taxing part of driving

      By PranK · Posted

      Go back and watch the video again... 
    • funkymonkey
      Most women will agree that parking is the most taxing part of driving

      By funkymonkey · Posted

      Are you meant to double fist them?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
×
×
  • Create New...