Jump to content
SAU Community

Recommended Posts

Thought that I would write a VERY quick review of the R2C duel short ram intakes that I posted about previously. I don't have any pictures of them installed but funnily enough they look EXACTLY the same as the pictures from the R2C website.....I did take before and after videos on my phone to see if you could pick up any difference in the sound, but unfortunately the sound recording on the phone is shite (as expected), so all you can hear is my VERY happy expletives in the background.

Just in case anyone doesn't know what I am talking about, I bought these (http://www.r2cperformance.com/-infiniti-g37-cold-air-intake.aspx) from the states about 2 weeks ago through one of the sellers on the myg37.com forum and they arrived last Friday. List price for the Black Nickel pipes is US$549, as you can see on the link above, the deal I got was US$515, including delivery, which would normally be another US$80 or so. With the exchange rate at the time, they cost $492 to my door. Took just over one week to get here, which I was impressed with.

They were packaged VERY well, with copious amounts of bubble wrap and extra paper thrown in the box for padding. Opened the box, unwrapped the first pipe and was blown away by how awesome the Black Nickel piping looks and how clean all of the welds are. They truly are sexy and, in my opinion, compliment the engine bay better than any silver piping ever could.

I was a little hung over on Saturday morning so waited until early arvo to begin the install. To be honest the instructions are shit, a couple of pictures that vaguely match up with the written areas, the only useful part was a diagram at the back showing all of the parts and how it all goes together, but to be honest, if you cant figure out how to put them together you should DEFINITELY not be touching anything on your car apart from the steering wheel.

Pulling the old intake out of the car was a piece of piss, undo a couple of mounting bolts and a couple of house clamps and out they pop. You do need to give a little yank on the filter housing, as it pushes into two plastic mounts underneath quite firmly. The reinstall is just as easy, the only issue I had, which probably cost me about 30mins of wasted time, was that they did supply one long hose to replace the existing hoses, but it was actually easier to simply reuse the existing hoses and just reroute them a little differently. All up it took me just over 2 hours, from start to finish, and I am no mechanic so anyone should be able to do it.

Once everything was in I started it up and gave a little rev and could instantly hear a slightly deeper growl which was satisfying. I had really expected that to be about it and was quite happy but then I went for a drive..........the difference is like night and day. The slightly deeper growl whilst idle, turns into a seriously loud, jeans tenting, roar when under load. I had not expected the intake to be as loud as it is, but it really sounds like a totally different engine. It begins at around 4000rpm and once I got up to 6000 - 7500rpm, my pants were definitely feeling too small for me. What was once a very civil, almost boring sounding engine, now sounds the way that something with this level of performance should do (like it is coming to eat you alive).

I know that I probably sound like I am exaggerating, but I took a few friends/colleagues for drives over the weekend, including a colleague who has just bought a 2012 G37 Convertible in the states, and none of them could believe the difference. The guy with the convertible was very jealous.

As for an actual performance increase, I haven't really noticed a hell of a lot, at times I get the feeling that it is more responsive and possibly a little quicker but it could just be the placebo affect. I have managed to spin the wheels a little when taking off on a slight bend, which was impossible in the past (and should still be now with the computer controlling everything), not sure if this is any indication. Even if it had freed up a few KW, I wouldn't expect it to be enough to actually notice on anything but a DYNO.

Overall, I cant convey in words how happy I am with these intakes, I enjoyed driving the car immensely in the past, but now it feels like a completely different beast.

HIGHLY RECOMMENDED!

Link to comment
https://www.sau.com.au/forums/topic/393138-r2c-intake-review-v36/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
    • Run some injector cleaner through it I had a similar issue that plagued me for months, even tried replacing the cat. If one or more injectors are blocked up the ecu sees ping so pulls timing and makes the tune rich overall, you'll see black smoke coming out of the exhaust and like me assume it's running rich but it could only be one or two cylinders  $10 bottle of injector cleaner and the next time I hit boost it pumped out a huge plume of black smoke, cleared the blockage and then ran great, if that's not the issue it's only a cheap thing to try haha  
×
×
  • Create New...