Jump to content
SAU Community

Recommended Posts

Sparco Rev seats BRAND NEW with sideplates, rails and harness. These seats are the same as Sparco EVO’s, however,they are slightly narrower.

These seats were purchased for $3000 brandnew for a project that never took off and have been in my shed wrapped inplastic ever since.

Seats, side plates and rails available alltogether for $700ea

Harnesses sold separately for $150ea

I have two seats available each with side plates, rails and matchingharnesses.

No swaps, pick up only.

post-53617-0-39310400-1330348875_thumb.jpg

post-53617-0-72839800-1330348902_thumb.jpg

post-53617-0-68077300-1330348928_thumb.jpg

post-53617-0-37215100-1330348949_thumb.jpg

post-53617-0-60444200-1330348974_thumb.jpg

post-53617-0-38364400-1330348999_thumb.jpg

post-53617-0-26089600-1330349023_thumb.jpg

5 speed WRX Dog box PPG gear set withbillit selector forks and reverse lock out. Gearbox is in good condition andhas only done 3000km’s. Gearbox was taken apart to show condition of gears (seephotos). This gear set was purchased for $11,500 brand new. Will come with allthe spare parts that we currently have from the other WRX gearboxes at no extra cost. DCCD rear end and two spare standard WRX ends as well as a spare gear box.

Price - $4,500 (non-negotiable)

No swapping, pick up only.

post-53617-0-98208200-1330349125_thumb.jpg

post-53617-0-63988000-1330349462_thumb.jpg

post-53617-0-37264800-1330349522_thumb.jpg

post-53617-0-65555400-1330349560_thumb.jpg

Built RB25DET yet to be run. This enginehas been machined and built with fully forged internals. Re-built the enginefor a project that ran out of funding and has been in my shed wrapped inplastic waiting to go to a good home. Engine comes with the following brand newitems:

  • Eagle Rods (fitted)
  • King bearings - Main bearing & Big endbearings (fitted)
  • CP Piston & Rings (fitted)
  • JUN crank collar (fitted)
  • ARP Stud Kits (fitted)
  • HKS Ex Cam Gear
  • Cometic MLS Head Gasket – 1.2mm
  • Ported head – has no lifters
  • 3 angle valve job
  • N1 water pump
  • N1 oil pump

All parts that are not fitted, still comewith the engine as separate parts.

Price - $4,500 for engine and all parts

Please note that the turbo kit seen on the engine is sold separately. Please see my posts to view details.

No swaps, pick up only.

post-53617-0-23171000-1330350135_thumb.jpg

post-53617-0-91831900-1330350174_thumb.jpg

post-53617-0-70820200-1330350210_thumb.jpg

post-53617-0-60443400-1330350247_thumb.jpg

post-53617-0-51560000-1330350285_thumb.jpg

post-53617-0-86728800-1330350328_thumb.jpg

post-53617-0-27011600-1330350370_thumb.jpg

Brand new HKS turbo kit yet to be run. Waspart of an engine build that ran out of funding and has been un-used, wrappedin plastic ever since. Full turbo kit details are:

HKS 3037S turbo AR .87, 48T, GT25 Exhaustflange - $2,500

HKS Manifold - $1,100

HKS 50mm wastegate - $900

Happy to split up kit and sellindividually.

No swaps.

post-53617-0-88049300-1330350625_thumb.jpg

post-53617-0-84443200-1330350634_thumb.jpg

post-53617-0-36190500-1330350642_thumb.jpg

post-53617-0-73974100-1330350667_thumb.jpg

post-53617-0-47484600-1330350691_thumb.jpg

post-53617-0-91106300-1330350696_thumb.jpg

post-53617-0-61903800-1330350724_thumb.jpg

I have no idea what you just did or wat any of that means but ok :)

Threads merged.

Read the forum rules before mass-spamming with singular threads in the future.

Brand new HKS turbo kit yet to be run. Waspart of an engine build that ran out of funding and has been un-used, wrappedin plastic ever since. Full turbo kit details are:

HKS 3037S turbo AR .87, 48T, GT25 Exhaustflange - $2,500

HKS Manifold - $1,100

HKS 50mm wastegate - $900

Happy to split up kit and sellindividually.

No swaps.

This is an RB25det Kit forgot to mention that.

I also have my Nismo gt lsd complete in the housing done less than 1000kms $1000 firm can pick up from Ipswich or pickup from my house in Brisbane.

post-53617-0-74473600-1330750634_thumb.jpg

post-53617-0-23158400-1330750657_thumb.jpg

post-53617-0-86398100-1330750682_thumb.jpg

post-53617-0-01115600-1330750706_thumb.jpg

post-53617-0-22489200-1330750729_thumb.jpg

post-53617-0-75639900-1330750752_thumb.jpg

post-53617-0-42642800-1330750770_thumb.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...