Jump to content
SAU Community

Recommended Posts

I get a lot of different opinions on the specs of 32 gtst injectors,

most of the confusion is from people trying too sell injectors for it but they arent legit and the size is wrong. (ebay etc...)

I know they are top feed

I do know they are high resistance, but how many ohms?

How long are they? Full? Half? 1/3?

What type of plug is it?

They are 11mm right?

Pressure 42 psi right?

Flow 270cc right?

Whats that other pressure rating about?(sometimes theres another one in the specs)

ANY other or more specific info would be great.

Any suggestions for NEW not second hand injectors would be appreciated.

Resistance.. I used 10ohm resistors when wiring in the GTR injectors, I think total the stock injectors are 12-14ohms

Length.. not sure, would say full (longer than my new injectors which are apparently 3/4 length)

Plug.. GTR is Bosh EV1 style and stock plugs fit GTR injectors if the locating tab is filed off.

I think they are actually 10.5mm not 11mm

Fuel system is a 3-bar system so with no vacuum signal you should be seeing 43-44psi

And yes, 270cc

Changing to a GTR style setup will open your options right up and it's just a small wiring change. I spent big dollars on drop in replacements but the latest setup I just went with second GTR injectors, made my own resistor box and made a whole new injector harness with brand new bosch plugs. Bang for buck :thumbsup:

I got my drop in replacements from Powerflow Injection I think they're called, supplied plugs too but they were second hand chopped off some loom they had laying around..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
×
×
  • Create New...