Jump to content
SAU Community

Recommended Posts

Hey guys.

I am trying to bring my R32 Gtr up to immaculate condition interior wise.

These are the parts i am after. i am after as good as possible quality.

- cluster surround, also indicator stalk surround

- interior door handles and surround

- rear window/roof lining trim

- window top seals

- AC vents middle and left, need to be perfect or i dont want them.

- lots of other little pieices that i cant think of.

The quality needs to be there, this is basically to make my car perfect.

pls pm or post what you have, we can look at photos and go from there.

JD

Link to comment
https://www.sau.com.au/forums/topic/393332-r32-gtr-interior-parts/
Share on other sites

not 100% sure mate.

if you swing me some pics to [email protected] i can have a look see and see whether they will work.

Its more the colours i think that were immediately different and trim quality level.

most of the garnished pillars lining etc should be same same.. also the colour needs to be same as currently in there.

Might need to upload some pics so i can be more descriptive of what im after.

cheers

Hey guys.

I am trying to bring my R32 Gtr up to immaculate condition interior wise.

These are the parts i am after. i am after as good as possible quality.

- cluster surround, also indicator stalk surround

- interior door handles and surround

- rear window/roof lining trim

- window top seals

- AC vents middle and left, need to be perfect or i dont want them.

- lots of other little pieices that i cant think of.

The quality needs to be there, this is basically to make my car perfect.

pls pm or post what you have, we can look at photos and go from there.

JD

i've definitely got a perfect centre vent and a few sets of steering wheel surround plastics off the top of my head.... can have a look for the other bits over the weekend if ou want

i'm in sydney

pete

i've definitely got a perfect centre vent and a few sets of steering wheel surround plastics off the top of my head.... can have a look for the other bits over the weekend if ou want

i'm in sydney

pete

Thanks mate..

would appreciate that.. looking for as close to perfect as possible. think im ok for vents, RHD has then for really cheap brand new so might be easier.

Still looking into replacing the drive shafts. havent forgotten bout your offer. just need time to get the mechanic to have a quick look again and double check.

cheers mate.

Thanks mate..

would appreciate that.. looking for as close to perfect as possible. think im ok for vents, RHD has then for really cheap brand new so might be easier.

Still looking into replacing the drive shafts. havent forgotten bout your offer. just need time to get the mechanic to have a quick look again and double check.

cheers mate.

righto, of all the gtr stuff laying around in the shed it's probably not as perfect as you want it

the centre vent i have is perfect in the sense that it's unbroken and the fins are perfect, but it has a tiny mark on the front

happy to pm a pic if you want to check it out

pete

  • 3 weeks later...

+2 for BIGBOSS. Got some immaculate stuff from him recently.

Check his FS thread he had all the parts you mentioned (in pics).

Maguires also put out a good product to bring trim back to new

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...