Jump to content
SAU Community

Recommended Posts

Item for Sale: 1999 Nissan Skyline R34 Description: r34 sedan gtr front end conversion lots of mods Location: Alberton QLD 4207 Region: QLD: Brisbane Odometre: 130,000 kilometres Asking Price: $16,500 Negotiable Condition: Used Reason for Sale: after a change Delivery Methods: PickUp Contact Method: Mobile [click to view] Extra Information: For sale my nissan r34 skyline sedan 1999

6 months rego can supply roadworthy cert

located in eagleby brisbane

BODY

r34 GTR front end conversion

genuine gtr bonnett and front bar

rolled guards

factory paint in excellent condition

near perfect body condition

tinted windows

xenon head lights

WHEELS AND SUSPENSION

18x9 front + 22 koya crteks

18x10 rear + 20 rears brand new tyres streach tyres

tein adjustable coilovers all round in perfect condition

springs not to stiff so very comfortable ride but handels very well

ENGINE

rb25det neo

5 speed twin plate clutch in near perfect condition

lsd 1.5 way

apexi power fc and controller

garrett gtx3076 top mount turbo

ext gate

speed flow lines

3inch dump pipe to

3.5 inch zaust full system with 3.5 inch cat

bosch 044 fuel pump

front mount cooler 100mm

fuel press reg

hks filter on 4 inch inlet pipe to tubo

i have a z32 afm to supply when car is retuned

just needs injectors and retune to make 400hp +

INTERIOR

stock seats neat and tidy

nardi torino steer wheel

apexi power fc hand controller

PRICE

$16500 neg open to swaps for turbo supra manual must b a very neat and tidy supra as this car is mint

PH MIKE 0450395700

PIC LINK

http://www.boostclas...4-for-Sale.html

Edited by mrxx
Link to comment
https://www.sau.com.au/forums/topic/393455-r34-sedan-turbo-5-speed/
Share on other sites

  • 2 weeks later...
  • 2 months later...


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...