Jump to content
SAU Community

Recommended Posts

I know its been asked alot but im new to the RB25/30 turbo'd thing.. i just got a RB25 R33 GTS-T head and buildind a RB30 bottom end im aiming for 320+rwkw (435rwhp+) any advice welcome on anything more info the better my mate and i goin to build it!!

cheers oscar

Edited by MRHD66
Link to comment
https://www.sau.com.au/forums/topic/394156-rb2530-help/
Share on other sites

in before it's closed, try searching and read what has already been written.

what do you need to know, 320rwkws is easy for a 25/30, fordged piston and rods, cams, injectors and the correct turbo and then keep winding in boost till you get what you want :thumbsup:

or buy a rb26 a pair of -5s, poncams, 700cc injectors and a rb30 sump

Link to comment
https://www.sau.com.au/forums/topic/394156-rb2530-help/#findComment-6266891
Share on other sites

HD holden, gold, I was at oran park one day with the BSM guys ( GTR race team ) and heard a nice sounding rb pull in stuck my head out the door and no other skylines anywhere, but a very clean EH wagon with a older gentle man climbing out of it,after a quick chat it turns out he put a full GTR driveline in it with 300wkw

Link to comment
https://www.sau.com.au/forums/topic/394156-rb2530-help/#findComment-6266950
Share on other sites

Thread closed. Believe it or not, but since SAU started more than 7 years ago, this topic has been discussed before.

Please use the search function in future. It may be found here:

http://www.skylinesaustralia.com/forums/index.php?app=core&module=search&search_in=forums

While we understand that it can be frustrating to have your thread closed - Please consider that other members may feel it to be disrespectful and selfish of you to post a simple question, without using the search feature to review the wealth of information provided by said members over the years.

If you still feel that this action is unjust, then please PM me and we can discuss it further.

Link to comment
https://www.sau.com.au/forums/topic/394156-rb2530-help/#findComment-6267397
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...