Jump to content
SAU Community

Recommended Posts

Hey guys.

just fitted a brand new set of Kumho KU31 225/40/19 fronts & 245 rears, got great pricing and shipping from Tempe so was very pleased!

I understand they need "running-in" for around the 1-200km (distance) mark, but does this effect tyre noise also?

They seem to be friggin noisey buggas, besides the fit/balance I also opted for alignment etc.

Link to comment
https://www.sau.com.au/forums/topic/394192-new-tyres/
Share on other sites

V35s have crap sound insulation IMHO - I have always found tyres to be noisier than I would like - espeically since I buy aggressive/high performance tread styles, which tend to have blocky shoulders - it is the big blocky tyre shoulders that make for a noisy tyre I find.

Bad news is the noise will not get better for you .....

Link to comment
https://www.sau.com.au/forums/topic/394192-new-tyres/#findComment-6267681
Share on other sites

  • 1 month later...

Sorry to bring up an old thread but looking for new front tyres for a V-sedan.

At the moment I have $88 carbon series 235/40R18s on the front (18x8s, no stretch) and the same on the rear (18x9/9.5, little bit of stretch).

The rear tyres I got off a commodore which still had some tread but they are almost bald and want to put the fronts on the back and get new, better brand ones on the front that give me a bit of stretch to match the rear.

Looking at around $200/250 region a tyre.

Had khumos and Bridgestone before and liked them. Had good year and never again.

Link to comment
https://www.sau.com.au/forums/topic/394192-new-tyres/#findComment-6326361
Share on other sites

try (rotalla?) f-107's in 18's .... theyre a quiet tyre with decent grip. i had them on a previous set of 19's and liked them.

as long as the tyres have a wear rating over 300 theyll last a long time. if theyre rated at 180, grip will be great but youll be replacing them within 6 months max

my current front tyres - carbon series CS88's - sound like and have a noise level similar to a 4x4 with knobbly tyres. theyre horrible

Edited by Deep Dish V35
Link to comment
https://www.sau.com.au/forums/topic/394192-new-tyres/#findComment-6328571
Share on other sites

Yeah man I did. I only put the carbon ones on the front because I got given some old 235 /40s that had some tread left so I could fry them and not worry, but they're almost bald so I'm putting new fronts on and moving the Chinese ones to the rear

Link to comment
https://www.sau.com.au/forums/topic/394192-new-tyres/#findComment-6330191
Share on other sites

i have absolutely no hesitation in using chinese stuff. the last set lasted 5 years / 50,000 km with not one problem. a tyre is not worth more than $100 to me.

A lot of ppl on this forum will probably make you eat your words but each to their own. yes the cheaper tires last longer as they have a harder compound which effectively means less grip, but yes they will last u ages if u drive sensibly, but in an emergency or in the wet I wouldn't bet my life on it. The higher end tires have a softer compound, more grip and wear quicker.

Ever play Gran Turismo and wonder why they grade tires hard, medium, soft and the soft racing tires are always the most expensive?

Link to comment
https://www.sau.com.au/forums/topic/394192-new-tyres/#findComment-6333885
Share on other sites

A lot of ppl on this forum will probably make you eat your words but each to their own. yes the cheaper tires last longer as they have a harder compound which effectively means less grip, but yes they will last u ages if u drive sensibly, but in an emergency or in the wet I wouldn't bet my life on it. The higher end tires have a softer compound, more grip and wear quicker.

Ever play Gran Turismo and wonder why they grade tires hard, medium, soft and the soft racing tires are always the most expensive?

after decades of owning name brand tyres, and in one year going thru 4 sets.... never again will i waste my money. i dont drive in a manner that makes the difference in grip even slightly noticeable, all i care about is whether they look good stretched over a rim thats too wide for them ;)

plus, its not a real skyline anyway :P

Edited by Deep Dish V35
Link to comment
https://www.sau.com.au/forums/topic/394192-new-tyres/#findComment-6333922
Share on other sites

  • 1 year later...

Old post but I just went from Kumho to Continental ContiSport 5P's for the rears on my 370 GT, and oh my god the difference is massive.... Traction control barely has to kick in any more when you give it the beans from a standing start, and you can feel the increased grip in the corners. Very very pleased, bank balance is alot poorer... $380 each from St George...

Now I'm looking at some new fronts, St George have some Hancook designed carbon series for the fronts that are a hard compound tire for $100 a piece... But after my experience with the rears i'm tempted to up the anti a little this time but the bank balance is pinching hard.

Has anyone used the carbon series tires?

I have just worn through a pair of Falkens in a year and $30k, that were about $200 each and pretty useless, huge road noise too, not too sure I want to strecth up to $300 for Conti's on the front... Also some crazy ass hi tech looking Nitto's for $230... Anyone chime in with some advice...

Link to comment
https://www.sau.com.au/forums/topic/394192-new-tyres/#findComment-6941164
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...