Skyline Parts

[dontfeelcold]

1: enkei rp01 17 x 9 +22

just had them resprayed silver (matched to the original colour).

$900 + $50 postage Australia wide.

enkei rims

2: Garret turbos for a GTR. 2860 -7

Just rebuilt by Precision Turbos. Both have brand new bearings and the exhaust housings have been ceramic coated in black. As good as new and haven't been used since the rebuild.

Part numbers from the cores:

HH 0110J

14411-AA403

707160-7

Part number from actuators:

430819-369

08223

35367

$1600 + $50 postage (includes insurance)

turbos

3: R32 GTR Fibreglass front diffuser

See the link for details as it is the one I bought.

R32 GTR diffuser

$220 + $25 postage

4: Speedline 17 x 9 +25

Tyres are dead but may pass rego. I lost one centre cap on the road Comes with the centre cap tool too.

usual small gutter rash

$400 + $50 postage

speedline SOLD

5: 4" stainless exhaust

Front pipes to back

only used for a short time by previous owner, catco cats on each leg of the front pipe. Will need to be welded back together. I cut it up to squeeze it in my car.

$400 can be posted but unsure of postage costs.

exhaust SOLD

6: r32 GTR side skirts 2 pairs

both need straightening and one set needs painting, the other needs a GOOD polish

just take them. SOLD

7: RB26 block with rods pistons and crank (pistons and rods removed from block)

no cracks, all is in good nick.

$200 SOLD

7: RB26 standard rods and pistons in excellent condition.

$100

9: used aftermarket rb26 manifolds not sure on brand, no cracks, provisions for heat shields

ceramic coated black

$200 + $20 postage

manifolds

11: R33 GTR aircon compressor sold as is

$50

air con compressor

12: R33 GTR standard clutch, flywheel and pressure plate USED

$50

clutch NO LONGER FOR SALE

13: N1 water pump used

$50 + $12 postage

14: N1 oil pump used, not cracked

$50 + $12 postage SOLD

15: ex BSM R32 GTR sump, with baffles and extended pan

needs a donor sump for the diff parts

$850 + postage

sump

16: standard r32 gtr sump good condition

$200

17: ex BSM R32 GTR Quaife front diff centre used but in good condition

$1200

quaife SOLD

18: tomei pon cam replicas bought from dirtgarage (who used them for a short time) then not used by me.

260in 260ex 9.15mm lift

$400 + $20 postage SOLD

19: R32 GTR fibreglass N1 bonnet lip painted in white NEW

$80

lip

20: R32 GTR fibreglass N1 boot lip painted in white NEW

$160

lip SOLD

21: R32 GTR Trust style fibreglass rear pods painted in white NEW

$160

pods

22: Simota Air filters to suit R32 33 34 GTR

$50 + $15 postage

http://imageshack.us.../img0117ya.jpg/

23: Apexi AVC-R Boost Controller USED but everything is there.

$350 +$15 postage

http://imageshack.us.../img0088mu.jpg/

24: UAS Pivoting Front Upper Arms

$500 +$20 postage

http://imageshack.us.../img0090qw.jpg/

25: GK Tech Rear Upper Arms and Traction Arms

Comes with the updated parts.

http://www.gktech.co...32%20Skyline#13

$199 for the Upper Arms and $129 for the traction Arms. +$20 postage

26: 2 Genuine Z32 AFMS (brand new and unused) with used plugs

$500 + $15 postage to anywhere in Aus.

http://imageshack.us.../img0060xg.jpg/

27: R32 GTR Bilsteins

Unsure of the spring rates. No leaks and in good condition.

$350 +$30 postage

http://imageshack.us.../img0091ps.jpg/

28: R32 GTR Ohlins

Unsure of spring rates and they are leaking. One has been pulled apart but everything is there as I was going to tinker with them.

Free to a good home. $30 if you want them posted.

http://imageshack.us.../img0093vz.jpg/

29: R33 GTR alternator

Unsure of condition. Came off a running motor.

$50

http://imageshack.us.../img0095co.jpg/

30: S13 Quick Shifter

Unknown brand. doesn't include the actual stick but it should be hard to get something put on.

$50 +$15 postage

http://imageshack.us.../img0096wq.jpg/

31: R32 GTR engine covers

Could do with a respray.

$100 +$30 postage

http://imageshack.us.../img0097tu.jpg/

32: RB26 Eagle Rods BRAND NEW

$580 +$20 postage

http://imageshack.us.../img0101pc.jpg/

33: R32 GTR HICAS steel lines that run from the front to the rear of the car.

Might be handy as fuel lines as they bolt straight into a standard car.

Free to a good home.

http://imageshack.us.../img0102kp.jpg/

34: R32 GTR oil pumps

Both used but in need of a good clean. See the picsfor the condition of the pumps where they are driven.

$40 each + $15 postage

http://imageshack.us.../img0105pn.jpg/

35: Apexi Pen type turbo timer

$10 +$7 postage

http://imageshack.us.../img0108gs.jpg/

36: Ruzic Enginerring 4WD controller. Brand New and unused.

$450 + $15 postage

http://imageshack.us.../img0055ln.jpg/

37: Single din socket for skyline dashs

Put things on there.

$10 +$7 postage

http://imageshack.us.../img0110ox.jpg/

38: R32 GTR ignitor used

$50 +$10 postage

http://imageshack.us.../img0111ih.jpg/

39: R32 GTR CAS used

$50 +$10 postage

http://imageshack.us.../img0111ih.jpg/

40: Fidanza Vernier Cam gears

Brand new, never used

$170 +$15 postage

http://imageshack.us.../img0112jr.jpg/

41: R33 GTR standard gearbox sandwhich plate

Used

$20 +$15 postage

http://imageshack.us.../img0113kx.jpg/

42: Ross Tuffbond RB26 Alternator pulley

Slows the alternator down, good for engines that spend alot of time at hi revs. Unsure of speed reduction but pulley dia is at the peak of the grooves where the belt runs.

$50 +$10 postage (small pulley for the alternator)

http://imageshack.us.../img0114ib.jpg/

43: Ross Tuffbond RB26 Waterpump pulley

Slows the waterpump down, good for engines that spend alot of time at hi revs. Unsure of speed reduction but the pulley dia is at the peak of the grooves where the belts run.

$50 +$10 postage (large pulley is for the waterpump)

http://imageshack.us.../img0114ib.jpg/

44: Rice Racing water injection

http://www.riceracin...r-injection.htm

Requires fab work to install and setup properly. Due the way this setup works it is better than the setups that use an electric pump to create pressure as it creates a finer mist which is the key to water injection that works especially pre turbo. the only downside is it requires a bit more thought when it comes to the installation.

PM me if you have more questions.

$850 +$20 postage insured

http://imageshack.us.../img0084pj.jpg/

45: Used Nismo FPR

$20 +$10 postage

http://imageshack.us.../img0085ib.jpg/

46: Autometer Pro Comp UltraLite Water Temp (in degrees F) and oil Pressure (in PSI)

Used. Comes with mounting brackets. Both gauges are mechanical.

$50 for both +$10 postage

http://imageshack.us.../img0087lx.jpg/

49: Nistune ECU + PLMS USB consult cable for a R32 GTR

Never installed the chip into the ecu. Comes with all the instructions and a R32 GTR ecu (minus the case). Will provide software keys and help with the transfer of the registration to the buyer.

$300 +$15 postage insured

PICS TO COME

50: XS Engineering throttle body shaft seals for RB26 throttle bodies

Fix those leaking throttle bodies with these

$100 +$10 postage

http://imageshack.us.../img0075cy.jpg/

51: 2x EGT K Type thermocouple plus plugs and a 2 channel amp

These exhaust gas temp sensors will fit the Tomei manifolds I am selling. The K Type thermo couples are a high quailty temp sensor that will easily handle the hi exhaust temps found post turbo. The plugs are specifically made to work with the temp sensors and the 2 channel amp turns the signals from the sensors into something an ecu (even Nistune) can read.

$300 +$15 postage insured

http://imageshack.us.../img0076fp.jpg/

52: Jaycar Courtesy Light Delay kit

Assembled and used (so it works properly) but my alarm didn't like it.

$10 +$6 postage

http://imageshack.us.../img0083cc.jpg/

53: M12 x 1.5 wheel nut set contains 20 nuts and a tool to do them up.

I was sent the wrong nuts.

$20 +$10 postage

http://imageshack.us.../img0081ht.jpg/

54: NTK 02 sensors to suit a R32 GTR (Titania type) x2

Ready to bolt straight in with the correct plugs attached.

$220 +$15 postage insured

http://imageshack.us/photo/my-images/145/img0074v.jpg/

I also have bits and pieces from a complete engine. No block or head. have exhaust manifolds complete inlet plenum and heaps nuts and bolts, coil packs, wiring, knock sensors etc. PM me if you need something.

Will post at buyers expense. Pick up is available from Quakers Hill

Josh

Edited August 25, 2012 by dontfeelcold

[dontfeelcold]

49: Nistune ECU + PLMS USB consult cable for a R32 GTR + Individual Tuner License + R32 GTR ECU (minus the case)

Never installed the chip into the ecu. Comes with all the instructions and a R32 GTR ecu (minus the case). Will provide software keys and help with the transfer of the registration to the buyer.

$560 +$15 postage insured

http://imageshack.us/photo/my-images/43/img01281w.jpg/

[dontfeelcold]

Fuel pressure reg and Autometer gauges sold!

[R32.GTR]

Still got the gtr flywheel mate? Where you located?

[dontfeelcold]

Flywheel is gone.

Turbos are sold

[GTRBOYZ]

Picture of no.9 Manifold and condition thanks

cheers

[dontfeelcold]

manifolds

Edited September 2, 2012 by dontfeelcold

[dontfeelcold]

Condition is used with no cracks. The flanges were ground flat before they were ceramic coated and haven't been used after.

[Hot33r8723]

Is the block sold inbox me

[GTRBOYZ]

manifolds

NVM thanks I just bought the Manifold....I couldnt wait..Cheers Edited September 3, 2012 by GTRBOYZ

[toy515]

Still got the apexi avcr pm me

[dontfeelcold]

The block is sold.

The AVCR is still for sale.

[dontfeelcold]

the latest list is at the beginning of this page.

[dontfeelcold]

bump