Jump to content
SAU Community

Recommended Posts

Hi guys

I just purchased some rims which I will be looking to include on my current car policy to have insured.

Just wondering if there are any types of wheel lock nuts that are approved/preferred by insurance companies (like alarms)

Hoping some night owls will be up to provide input.. ill be calling shannons tomorrow to ask anyway.

Thanks

Karl

Link to comment
https://www.sau.com.au/forums/topic/394527-wheel-security-lock-nuts/
Share on other sites

FYI - Just spoke with my insurance co. And they said there werent any security requirement in terms of types of lock nuts to be used.

Additionally, there was no increase to my policy with the wheels covered.

now all I need are lock nuts. Someone mentioned McGards?

the cheapest ones?? your insurance is covering them.

if you pay for expensive ones, and someone tries to steal your rims and succeeds then you would make a claim... if they fail, they are going to do damage to the rims/lock nuts in the process.. you would then make a claim to your insurance company irrespective.

however, i would get it in writing from the insurer that there are no requirements to fit lock nuts to comply with your policy..

I hate lock nuts, the key will sit in your glove box rattling around till its time to remove your wheel, then it will magic itself lost.

And if some one steals your car they will get the key out of the glove box, ashtray, wheel well.

I hate lock nuts, the key will sit in your glove box rattling around till its time to remove your wheel, then it will magic itself lost.

And if some one steals your car they will get the key out of the glove box, ashtray, wheel well.

This man speakith the truth!

I just recently lost my key. But interestingly enough, a 20mm socket fit perfectly over my 19mm locknut and undid them without damaging anything. Hows that for security!

Just replaced them with a set of Nutsac black nuts. Cheap, and work.

the cheapest ones?? your insurance is covering them.

if you pay for expensive ones, and someone tries to steal your rims and succeeds then you would make a claim... if they fail, they are going to do damage to the rims/lock nuts in the process.. you would then make a claim to your insurance company irrespective.

however, i would get it in writing from the insurer that there are no requirements to fit lock nuts to comply with your policy..

Thanks for all your input.

I ended up buying a cheaper set of lock nuts, and as above, if they end your taking the rims without the immobilizer going off, the floodlight waking up the house and my 3 dogs nOt detecting them..then they probably deserve it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...