Jump to content
SAU Community

Recommended Posts

Hey guys/girls im new to this forum so not sure where to post something like this.

Basicly im a 19 year old seeking another job in the metal trade.

I used to work for a place called Denkat trucks building custom made truck body's and special fabrications that company's required for their trucks e.g hydraulics, tie down point's, door ways, tail gates (not so much experience) and tow bars.

I have around 7 modules left till i complete my Automotive vehicle body building cert III. Also done abit of work experience here and their building radio towers, pannel beater, storeman.

I consider myself very handy for my age and fabricating metal is my passion. I am very good at mig welding oxy cutting etc and can weld to a degree with a stick welder, i have also yoused machines such as gillotines, benders (pipe/sheet) and i currently have my forklift license with reasonable experience on a few types.

At the moment my license has been expired for another 1.5 mth but appart from that i have reliable transport to and from work, i like to shop up atleast 15 20 min early as im sure my references will tell you.

I have prety much all of my tools $1000 speedglass welding helmet, face shield's goggles workwear Kingchrome top box full of tool's and a bottom box on rollers with even more usefull stuff (old boss realy hooked me up)

Thanks for spending the time to read all this and if anyone know's someone with a full time position/apprenticeship available or basicly any sort of lead i would be gratefull and if it leads to something good 6 pack may be provided Because ive been in and out of trials for nearly a year now and no one has realy had the work/hours to put me on full time and i desperatly searching for a foot in.

Dan.

Link to comment
https://www.sau.com.au/forums/topic/394604-desperatly-seeking-metal-work-trade/
Share on other sites

Mate to be honest jump on seek would be ur best bet

I'm a sheety by trade and most places ive seen really want trade papers

Can u tig?

Also what have u been ally miging?

I know one place worth a shot but doubt they will sign u off

Ive been to all the industrial estates in tweed, currumbin, burleigh, murwillumbah and yeah thats the problem im finding, they either want fully trained with a minimal amount of experience.

and i have ally welded heaps of diferent things, ally truck base, ally gates, etc

Dan if your willing to do FIFO or move up here there is alot of adult apprentice jobs going at the moment.

as booztjunky said get on seek or something and have look or try the Bechtel website

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...