Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

UPDATED LIST OF PARTS AVAILABLE

Still got these parts to clear!!!

Can get pictures of everything on request.

rb25det s1 motor, complete minus turbo/manifold etc, compression 145-160 on all 6 cylinders - $1200

(made 194.6kw with std. turbo on 12psi with full exhaust and intercooler so very healthy)

rb25det s2 gearbox 86,000kms on it - $1500 or as a manual conversion kit $1800 (everything you need)

HKS GT2835r turbo (420hp rated, seen couple track days since rebuild made 290rwkw on another car)

kit including HKS cast manifold, Greddy ext. gate, screamer pipe, dump pipe, steel braided lines,

turbo intake and hot+cold side piping in lobster back stainless steel by AM Performance - $2200

AM Performance cat back exhaust system 2x2.5" in to 2x4" pipe with titanium tips - $950

Yellow Jackets coilpacks for s1 rb25 (all working, used for 1 year, fantastic coilpack, search forums) - $250

ORC Single plate clutch, 409 series unsprung center, used for 6months still in good cond - $400

Sparco sprint + R33 drivers rail 2 months old $650

Sparco Evo 2 Plus seat, no rails, brand new $500

Wlabro 550hp intank pump - $100

R33 BC BR Coilovers, used for 4000kms, like new - $900

KTS Sway bars front and rear with bushes - $350

R200 locked diff, tight as - $200

Kazama castor arms suit r33 and other models - $150 SOLD

Rear camber arms unknown brand, brand new - $100 on hold

R32 genuine GTR intercooler - 150

q45 afm - $80 SOLD

RB20/25 Short Shifter - $50

R33 Carbon Slam Panel/radiator cooling pannel - $100 on hold

R33 Nismo strut brace with brake stopper $180

Pineapples - $40

s2 dash surround with vents, buttons and clock, mint $100

s2 door trims with switches, mint $150

Work VS-XX 3pce wheels, 18x10 +13 front with kumho ku36 tyres 60%, 18x12 -4 rears with bridgestone tyres 40%

Just dropped two off to get re-polished and some rash taken out, may even re-powder coat the centers for those interested. Will be as new $3200

Make me an offer!! Im pretty reasonable, the worst I can say is no smile.gif

PM or 0422 314 938 - Marko

Edited by SkyHi_33

Also, im going away overseas in 3 weeks so want to clear everything!!!

Have all standard parts still on the shell, door trims, interior bits/consoles, engine bay stuff like brake master, clutch master, steering rack, alternator, starter motor, power steering pump, standard suspension arms, body panels, bonnet boot doors guards lights etc.

Everything must go!!!

Will be taking pictures of everything tomorrow and posting it up in here so keep an eye out, anything youre interested in PM me, Located in SA but can post anything anywhere!!!

Edited by SkyHi_33

Bought the R33 brake setup from Marko great guy to deal with sorted everything out including shipping and sent me heaps of pictures. Would definetly recommend him as a seller =] thanks you for pleasant smooth transaction.

Item was as described and pictured and boxed properly with all the parts/bolts.

Edited by DarkRyda

still got the z32, rear camber arms, castor arm and lock bar? pm me if so

Sorry, z32 and castor arms and lock bar are all sold, camber arms on hold! Will let you know if it falls through.

Bought the R33 brake setup from Marko great guy to deal with sorted everything out including shipping and sent me heaps of pictures. Would definetly recommend him as a seller =] thanks you for pleasant smooth transaction.

Item was as described and pictured and boxed properly with all the parts/bolts.

Thanks Justin, was a pleasure. Loving what youre doing with the brake kit and your car :)

Edited by SkyHi_33

Hi mate, is this a series 1? if it is i'm quite keen on the bonnet provided you still have it and can ship it to wa 6155 (at my expense of course)

Just let me know

Cheers

Nev

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...