Jump to content
SAU Community

Recommended Posts

Hey guys this just an EOI (Enquire Of Interest) to see if there is any interest in my skyline. A bit about the car it was a personal import back in 2008 my cousin bought it from a trader and barely drove it as he had r33 as well and was bare stock only had a 5zigen cat-back. Ive owned the car now for 2yrs+ and it has been my project and i barely drive it as im on P's :( its sees the road probably 2 times in a month. Car is immaculate and i have to say one of the cleanest 32s going around for sure.

Some mods:

Exterior:

-Ful vertex kit (copy but no ebay crap) fitted in June last year cost me $1200 for the kit from japwarehouse tullamarine.

-Carbon fibre hood GTR style cost me $1000

- GTR spoiler

- GTR headlights with amber indicators

- GANODOR style mirrors

All work was done by Excelsior panels

Interior

- Nismo short shifter and gear knob

- Genuine Red leather and suede seats

- suede steering wheel

-Clarion DVD player

- Has a HKS EVC 4 boost controller but is not connected all wired up solonoid not hooked up

- Blitz boost gauge

Engine: Is slightly moded with the basics and is clean as!

- GREEDY SPEC LS TUBE AND FIN intercooler $700

- Custom split dump pipe

- Blitz front pipe $350

- Xforce Hiflow Metalic cat not ceramic $250

-Pod filter

Thats all i can think of atm. Car has done 61XXXkms and runs so smooth and clean :D

Its manual

Can come with rego till next year january 2013

Does not come with lenso d1rs comes with standard gtst wheels.

Im looking for 11k with rego but offers will be considered but by saying that nothing stupid NO LOW BALLERS people who know this car know its meticulousy looked after and cared for, always serviced with MOTUL oils and DRIFT filters.

If the a good offer is on hand may consider

You can SMS me on 0433476929 and ill get back to u asap

Located In northern suburbs melbourne

Thanks for looking

post-77571-0-50498100-1332162783_thumb.jpg

post-77571-0-66966800-1332163235_thumb.jpg

post-77571-0-14962000-1332163258_thumb.jpg

post-77571-0-00476200-1332163274_thumb.jpg

Edited by shev
Link to comment
https://www.sau.com.au/forums/topic/395281-eoinissan-skyline-hcr32-gtst/
Share on other sites

Looks like a really nice 32 mate. Throw up some pics of the interior and an engine back pic, will really help

Thanks mate spent a lot of time to get it to where it is now.

As asked more pics of engine and interior

post-77571-0-28458900-1332195245_thumb.jpg

post-77571-0-20822600-1332195256_thumb.jpg

NO LONGER AN EOI!!!

Been thinking long and hard now and its gonna be very regretful but i want to sell her to make way for a something new :(

So im taking resonable offers can work something out if people are intrested!

Thank you

  • 2 weeks later...

EOI is a acronym for "expression of interest", I expressed my interest in this car.

Read the rules boys, even though you hate rules, point one would be good point to start at, http://www.skylinesa...92#entry1281592

OP also asked for "all reasonable offers" I thought my offer was reasonable, he could say no....

Thankyou very much, come again.

If you read the rest of the comments on the post it says "NO LONGER AN EOI"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...