Jump to content
SAU Community

Mv35 Stagline


Howaitonaito
 Share

Recommended Posts

I dont think stageas (M35 ones anyway) are ugly. But when i seen this i had to put it up and was waiting for the "why would someone put a ugly front on a nice car" sorta phrase.....jetwreck why do you think im putting a stagea nose on a sedan for so it doesnt look like shrek and more like a skyline. The rest of the car is fine

Link to comment
Share on other sites

All those bolt on bits are classed as engine mods and ill get defected by the police (because im on my greens) . So they can wait. Suspension is almost done , just waiting on sway bars and links to arrive from japan. New brake rotors, pads abd lines are coming later

Edited by Howaitonaito
Link to comment
Share on other sites

  • 2 weeks later...

The parts are coming together nicely. Would like to thank the following people who have helped me out so far.

Daleo - Front bar.

Chadsta - non turbo radiator and headlight support.

Scotty - Grill.

thanks boys.

Anyone wanting to put a V series nose on their stag (which youd be mad too) will have some cheap parts left over. ie headlights (HiD), bonnet (QX1 white), Grill (chrome), fenders (both pinched by tyres, not bad tho) and radiator support (which fits coupe aswell) all will be going dirt dirt dirt cheap......

Anyone knows of a white stag wrecking PM me, will love you long time ;-P

Edited by Howaitonaito
Link to comment
Share on other sites

  • 3 weeks later...

Headlights, guards and bonnet this week. Who ever said it cant be done for under 3k i proved you wrong like i was planning to. You said i couldnt be done well it has.

The final stage is taking the V nose of and fitting the stag nose. There will lots of photos

Link to comment
Share on other sites

You must be looking at the wrong tits.

I like 'em perky & firm.

stag front on a n/a 2.5L..... far from perky and firm. more like seeing a big rack in a push up bra.... impressive until you undo the clip and see whats really inside

(just having jokes)

Edited by Deep Dish V35
Link to comment
Share on other sites

Yeah, I suppose; gotta start somewhere though.

I'm interested to see what it looks like.

I also encourage boob owners to jam 'em into a push bra; it's like putting chicken salt on hot chips.

Just makes a good thing even better.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Latest Posts

    • Hi all, I need to get this HKS SLD attached to my stock ECU because I've now got the German autobahn and faster European circuits to contend with.  The car is a manual 2dr ER34 with an AT ECU and I've realised the AT ECU has two pins for speed sensor signals: Pin 29: Vehicle speed sensor signal (Vehicle speed sensor 2) Pin *58: Output shaft rotation sensor signal (Vehicle speed sensor 1) - *RB25DET A/T model only Before I go butchering this harness, is anyone sure of which pin is the correct one for signal adjustment? The attached document from HKS indicates pin 29 but I found this situation mentioned in the following thread on a different forum (R34 GTT Auto Trans Speed Cut Problem | Zerotohundred) mentioning pin 58 needing to be altered by member zephuros, albeit it seems to be for an RSM-GP and the info appears to be old.  R34_All_Workshop_Manual-pages-2.pdf R34_All_Workshop_Manual-pages-3.pdf R34_All_Workshop_Manual-pages-1.pdf HKS SLD Vehicle Pin out P59-P70 ER34-pages.pdf
    • Embrace the freedom of casual encounters on the best dating app in town! Verified Maidens Superlative Сasual Dating
    • Slimline sub on the rear parcel shelf is doable. Pioneer TS-WX140DA is only 70mm high.   
    • People like Johnny Dose Bro might be laughing at my post because I accidentally added 100mm to my numbers. 350-355 is indeed the lower limit. 450 is off-road Skyline spec.
    • What is the "compromise" that you think will happen? Are you thinking that something will get damaged? The only things you have to be concerned about with spherical jointed suspension arms are; Arguments with the constabulary wrt their legality (they are likely to be illegal for road use without an engineering certificatation, and that may not be possible to obtain). A lot more NVH transmitted through to the passengers (which is hardly a concern for those with a preference for good handling, anyway). Greatly increased inspection and maintenance requirements (see above points, both).   It is extremely necessary to ask what car you are talking about. Your discussion on strut tops, for example, would be completely wrong for an R chassis, but be correct for an S chassis. R32s have specific problems that R33/4 do not have. Etc. I have hardened rubber bushes on upper rear control arms and traction rods. Adjustable length so as to be able to set both camber and bump steer. You cannot contemplate doing just the control arms and not the traction arms. And whatever bushing you have in one you should have in the other so that they have similar characteristics. Otherwise you can get increased oddness of behaviour as one bushing flexes and the other doesn't, changing the alignment between them. I have stock lower rear arms with urethane bushes. I may make changes here, these are are driven by the R32's geometry problems, so I won't discuss them here unless it proves necessary. I have spherical joints in the front caster rods. I have experienced absolutely no negatives and only positives from doing so. They are massively better than any other option. I have sphericals in the FUCAs, but this is driven largely by the (again) R32 specific problems with the motion of those arms. I just have to deal with the increased maintenance required. Given how much better the front end behaves with the sphericals in there.....I'd probably be tempted to go away from my preference (which is not to have sphericals on a road car, for 2 of the 3 reasons in the bulleted list above), just to gain those improvements. And so my preference for not using sphericals (in general) on a road car should be obvious. I use them judiciously, though, as required to solve particular problems.
×
×
  • Create New...