Jump to content
SAU Community

Recommended Posts

It seems that if you have a problem with your transmission and it's covered by warranty they're just going to replace it. The techs here obviously haven't been trained to repair these transmissions or Nissan Japan wants them back to find out where they're failing, I believe it's the same in the States as well. Would be interested in other people's thoughts on this.

It seems that if you have a problem with your transmission and it's covered by warranty they're just going to replace it. The techs here obviously haven't been trained to repair these transmissions or Nissan Japan wants them back to find out where they're failing, I believe it's the same in the States as well. Would be interested in other people's thoughts on this.

the problem initially when the car was first released was Borg Warner not releasing replacement parts, this limited what could be done in the aftermarket, so the blown box stories were scaring everybody. Now we even have aftermarket companies manufacturing stronger internal parts

the decision to replace the whole box rather than open it up is borne from a letigation stand point. As i commented before in this thread, having a third party work on someone else's part is just asking for trouble, and it's no different at the dealer level - Nissan Aus is the third party in this case, and they will charge the work back to Nissan Japan who will charge the work back to Borg Warner.

this dealer theory in replacing items rather than repairing is common place these days regardless of warranty work or not - if you want to have a go at repairing anything these days you need to go aftermarket

Edited by domino_z

^ this + others in the US have mentioned that Nissan take every bad transmission and study the reason behind the failure based on the vehicle information provided (eg, stock or upgraded, where, how, and what was the driver doing when it failed, black box readings, car service history, etc). This information is apparently then used to assist in future model equipment updates..

Whether this is true or not remains to be seen. Aftermarket guys in the US who have disected various models transmissions have noted that there have been no major changes since the 2008 release. Instead, what has changed is the LC transmission software.

Edited by Wardski

The latest car has a stronger shift fork according to marketing speel

Indeed.... Would also be nice if they fixed all the sensor and solenoid issues too. AFAIK these are the most frequent failure modes in "non-brutalised" stock cars, which unfortunately makes me a little concerned once the 3 years warranty on mine expires...

So basically what Nissan are saying is, after your 3 year warranty is over, 'piss off'! We're not going to offer you the option of purchasing additional manufacturers warranty, if you have any problems with your transmission we will charge you $20k++ to replace it. We will also charge ridiculously over inflated prices for any other parts and services you're going to need. Surely if you want continue to get a return on your investment (ie: the cost of setting up these dedicated service centres) you would offer the option of purchasing more warranty so people keep bringing the car back to you for servicing? Extended warranty is available in other countries where the R35 is sold, why not here in Australia?

So basically what Nissan are saying is, after your 3 year warranty is over, 'piss off'! We're not going to offer you the option of purchasing additional manufacturers warranty, if you have any problems with your transmission we will charge you $20k++ to replace it. We will also charge ridiculously over inflated prices for any other parts and services you're going to need. Surely if you want continue to get a return on your investment (ie: the cost of setting up these dedicated service centres) you would offer the option of purchasing more warranty so people keep bringing the car back to you for servicing? Extended warranty is available in other countries where the R35 is sold, why not here in Australia?

Nissan offer a luxurious 5 year, 60,000mile drive train warranty in the US, but we only get a 3 year, 100,000kms kms one. Nissan have also issued an additional warranty free of charge for the in dash speedo/revs/fuel gauge back lit system as the fuel light has been known to fail.

So, we are kinda in the dark with all the known issues affecting stock cars (ie, who knows when they will happen), and currently the GT-R is the only vehicle in Nissan Australia's range where there is no extended warranty offered. As far as why it's not offered, I'll be asking this question at my next service...

http://www.nissan.com.au/webpages/owning/Service_Nissan-Genuine-Extended-Warranty.html

Based on the way I baby all my cars, I think if an additional 2 years was offered (at a reasonable price based on condition at the 3 year mark) then I would probably take it - just for the piece of mind.

Edited by Wardski

I too had a similar issue, however my experience was quite the opposite. It was taken care of thoroughly and rapidly by the dealership and Nissan Australia. They both exceeded my expectations. So well in fact I can barely remember it. I wasn't running a cobb or any miracle oil, and after reading of your experience don't think I ever will. Were you running the cobb with the TCU option as well as the ECU?

If the tcu was not configured to suit your tune & mods it will lunch the cog swapper and, I am sorry to say Nissan Aust. would be right to politely knock back the claim. Upon further investigation of the vocal cases in the US it seems that the majority of the cars were also once running tunes, often ECU only. (you may need to use goggle cache to find them as they seem to be otherwise deleted from forums & blogs) An early sign of this could be a "not so snappy" change into even gears. The TCU controls the ECU to turn the power almost off during the shiftand only turns it back on after the clutch is bound again. If the power comes back on too soon or didn't turn down low enough it WILL physically destroy boxes.

Keep an eye out for the lame shift!

Really we cant expect any manufacturer to back a third parties dodgy firmware / software. Out of curiosity, what warrantee does Cobb or others offer on the performance of their product? Choose the performance products that offer the backing! If their warrantee is short or limited, we should ask why? We want confidence and if the manufacturer of performance stuff has no confidence in their products I sure won't have confidence.

Enjoy your car, they are awesome.

Hi sumo, you said lame shift, my Gtr sometimes if you change gears from 1st to 2nd it will like go into neutral but there is no throttle response and no drive. Is that what you mean? Mine also does what another guy said where depening on how much throttle you have down eg. If you have 75% down and you change early say about 3000rpm it won't change up and the gear selector no flashers. It's almost like the car is saying " you have a lot of throttle down why do you want to change so early" so it doesn't change up.

I too had a similar issue, however my experience was quite the opposite. It was taken care of thoroughly and rapidly by the dealership and Nissan Australia. They both exceeded my expectations. So well in fact I can barely remember it. I wasn't running a cobb or any miracle oil, and after reading of your experience don't think I ever will. Were you running the cobb with the TCU option as well as the ECU?

If the tcu was not configured to suit your tune & mods it will lunch the cog swapper and, I am sorry to say Nissan Aust. would be right to politely knock back the claim. Upon further investigation of the vocal cases in the US it seems that the majority of the cars were also once running tunes, often ECU only. (you may need to use goggle cache to find them as they seem to be otherwise deleted from forums & blogs) An early sign of this could be a "not so snappy" change into even gears. The TCU controls the ECU to turn the power almost off during the shiftand only turns it back on after the clutch is bound again. If the power comes back on too soon or didn't turn down low enough it WILL physically destroy boxes.

Keep an eye out for the lame shift!

Really we cant expect any manufacturer to back a third parties dodgy firmware / software. Out of curiosity, what warrantee does Cobb or others offer on the performance of their product? Choose the performance products that offer the backing! If their warrantee is short or limited, we should ask why? We want confidence and if the manufacturer of performance stuff has no confidence in their products I sure won't have confidence.

Enjoy your car, they are awesome.

It will be interesting to see what happens to the value of the ADM cars after they are 3 years old with no on going support from Nissan Aust. (no extended warranty available) and why would you go to them anyway when they just replace and not repair (ie: 20k+ for a tranny) Obviously there are specialists around that can work on the R35 but they're not available everywhere. Anybody know anyone who specialises in R35 repairs in Canberra?

It will be interesting to see what happens to the value of the ADM cars after they are 3 years old with no on going support from Nissan Aust. (no extended warranty available) and why would you go to them anyway when they just replace and not repair (ie: 20k+ for a tranny) Obviously there are specialists around that can work on the R35 but they're not available everywhere. Anybody know anyone who specialises in R35 repairs in Canberra?

I know for sure I won't be keeping mine after the wty is gone, unless Nissan can convince me to. The interesting thing is that you'll find 2nd hand Dealer certified 2009 and 2010 GT-R's with 2-3 years additional warranty... So does that mean I need to sell mine to Nissan, then buy it back to get dealer certified lol?

It's not the only "super car" out there with the "no extended warranty" issue. Audi R8's, Porsche 911 GT2's and 3's are in the same boat.

But for sure the real issue here is why no "consistency" country to country with the Warranty?? Nissan needs to explain themselves.

Edited by Wardski

Didn't know dealers were selling 2nd hand one's with 2 to 3 years extra warranty. Do you know if this is a full manufacturers warranty covering everything and can be serviced at any GT-R dealer? or is it a dealer specific warranty where the car must be serviced by them with $ limits and/or exclusions?

Didn't know dealers were selling 2nd hand one's with 2 to 3 years extra warranty. Do you know if this is a full manufacturers warranty covering everything and can be serviced at any GT-R dealer? or is it a dealer specific warranty where the car must be serviced by them with $ limits and/or exclusions?

When I was in the hunt for a late build 2010 or 2011 in Nov last year, I contacted a few dealers in WA and NSW who had low kms 2009's. They offered them as recertified Nissan GTR's and a few of the dealers offered an extended warranty on top of the balance after I told them I was not interested unless I had at least 3 years to cover the unknowns. So, some Nissan dealers do offer extended warranties on 2nds - it's hit n miss - but it's certainly not uncommon in the industry.

I ended up buying new, so I will never know what the extended warranties covered though - no doubt there was a catch....

Edited by Wardski

No worries thanks for that. I'll make some enquires. I'm in Canberra. Obviously no use buying a 2nd GT-R from a dealer in WA with extended warranty if it has to be serviced by them to maintain it!

Indeed! Another reason I went new.

Mind you, you could wait another few months and watch the price of new 2011's bottom out. I managed to pick up a new Oct 2010 build GT-R in SS for $38k off RRP because a dealership in WA (Magic Nissan) had to clear floor stock - and that price included delivery to me in QLD. They still have a 2011 in blue, which started out at $193k, now down to $177k drive away. I expect this to hit mid/high $160k's when the 2012 models start appearing in dealerships, so that could be a damn good deal.

It seems the GT-R market has bottomed out, especially the 2nd hand market, so there will be deals-a-plenty leading up to EOFY sales.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...