Jump to content
SAU Community

Recommended Posts

Captain obvious strikes again :rolleyes:

I think everybody here knows tuning will be needed to make e85 work mate..what Mick was saying is you don't need to crank a heap more boost for extra power and that he infact gained power dropping the boost..so yes he has gained by just swapping fuel and of course retuning for that fuel...

Yeah of course i realise it will need tuning with the new fuel but from what i can gather i am definitely looking at a gain and a fairly substantial one at that.

If i put some bigger injectors in it and re tuned at 17 psi i think from what i am reading, it would achieve a result, but of course, the idea of this fuel is to be able to crank boost into it with det resistance.

Matty Spry from PITS does the tune and the dyno sheet you see was only a power run i did when i was at 101 with a mate running his GTR on the dyno. We just wanted a comparison. Matt has achieved some fantastic results with my FJ and i would of course take it to him for the E85 tune. Next step will be discussing it with him. Just wanted some ideas first.

Does E85 cause excessive wear on rings or cylinder head or anything stupid i should know about? How about leaving the car for extended periods of time sitting? does the fuel turn to jelly or go off? i live in Germany part of the year so it doesn't get run so often while i'm here.

Lol thanks for pointing out the obvious ARTZ :thumbsup: i dont know of any disadvantages of E85 in a street car apart from the fuel consumption increasing and the lack of places to fuel up :whistling:

With a good tune your fuel increase should be around the 10-15% zone as my consumption stood at 420-450km max per tank of 98 in city driving and now im at bout 380-400 out of a tank of Eflex and at average its bout 30- 35c a litre cheaper than premo anyways almost evens things out.

Except when it comes to the power department of course :banana: [ quote name=ARTZ' timestamp='1333262217' post='6298851]

Captain obvious strikes again :rolleyes:

I think everybody here knows tuning will be needed to make e85 work mate..what Mick was saying is you don't need to crank a heap more boost for extra power and that he infact gained power dropping the boost..so yes he has gained by just swapping fuel and of course retuning for that fuel...

Can i ask why you only plan to run 17psi?? I dont know much bout FJ's but i run 850cc injectors and a single tomei in tank pump and 25psi boost with a 3071 on a stock 25 and im making good power! A built FJ should cop more than 17psi?? A 3040 will only be just starting to open its lungs at 17psi! if you gotta upsize your fuel system why not quench its thirst for E85 within the turbos limit? Seems crazy to me that you are gunna spend good money on a fuel system and not unlock the full potential of the turbo pinch.gif E85 absorbs water i dont know if it goes off as such.... Probably should of mentioned more oil changes too from E85 as ethanol tends to dilute oil faster or possibly running a heavier oil may or may not solve that problem.:thumbsup: My personal experience with E85 has been a good experience :rolleyes:

Yeah of course i realise it will need tuning with the new fuel but from what i can gather i am definitely looking at a gain and a fairly substantial one at that.

If i put some bigger injectors in it and re tuned at 17 psi i think from what i am reading, it would achieve a result, but of course, the idea of this fuel is to be able to crank boost into it with det resistance.

Matty Spry from PITS does he tune and the dyno sheet you see was only a power run i did when i was at 101 with a mate running his GTR on the dyno. We just wanted a comparison. Matt has achieved some fantastic results with my FJ and i would of course take it to him for the E85 tune. Next step will be discussing it with him. Just wanted some ideas first.

Does E85 cause excessive wear on rings or cylinder head or anything stupid i should know about? How about leaving the car for extended periods of time sitting? does the fuel turn to jelly or go off? i live in Germany part of the year so it doesn't get run so often while i'm here.

Thanks for the 2 latest replies since my last post.

i only wanted to establish that good power gains can be made if all things were equal and i just swapped the fuel to E85. (ie, if i ran 17psi as i do now and tuned to E85. What could i expect so to speak).

But of course, my plan is to up the boost level and see what it makes.

The comments about fuel consumption and water absorption was what i was looking for as well. I know it will use more fuel of course but figures are great. I will also look into the dilution of the oil.

Basically i want to know everything i can so i know what to expect. Yeah my turbo is just starting to work at 17psi, i know when i went from 14psi to 17 i was making just over 10hp per psi. I am also using a standard 55mm TB. I couldn't up the boost any more because it started to lean off over 7k rpm and the injectors were at 100% cycle.

Any others comments would be greatly appreciated.

Cheers guys.

Id expect a minimum of 10% power increase overall and anywhere up to 40+kw increase through your midrange :thumbsup:

Thanks for the 2 latest replies since my last post.

i only wanted to establish that good power gains can be made if all things were equal and i just swapped the fuel to E85. (ie, if i ran 17psi as i do now and tuned to E85. What could i expect so to speak).

But of course, my plan is to up the boost level and see what it makes.

The comments about fuel consumption and water absorption was what i was looking for as well. I know it will use more fuel of course but figures are great. I will also look into the dilution of the oil.

Basically i want to know everything i can so i know what to expect. Yeah my turbo is just starting to work at 17psi, i know when i went from 14psi to 17 i was making just over 10hp per psi. I am also using a standard 55mm TB. I couldn't up the boost any more because it started to lean off over 7k rpm and the injectors were at 100% cycle.

Any others comments would be greatly appreciated.

Cheers guys.

Not so sure you'll get a fat mid range with a GT3040R/GT3082R on a 2 litre four . They are known to be lazy on 2.5 L sixes and even a big bore medium stroke engine like an FJ20 won't change that .

Most aren't interested in the history lesson but the HKS spec "GT3040R" was the better one because its compressor was 50 trim not 56 trim like the Garrett marketed one is . Your call but I think a GTX3071R or GT3076R would be a better thing on an FJ20ET .

It's your money and you can spend lots of it trying to solve a turbo problem , or just use a more appropriate turbo first .

A .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...