Jump to content
SAU Community

Recommended Posts

wrecking Nissan skyline r34 gtt 2000 red

lots of parts available just ask cheers

motor rb25 det neo complete $2500 ( 125,000kms)

gearbox $2000

pedal kit $200

tail shaft $200

flywheel $100

diff lsd $300

cv joints $150 pair

nismo shocks and springs $900

standard full exhaust system $300

brake master cylinder $120

front calipers $350

front disks $100

front hubs $150

rear hubs complete $300

upper control arms each $30

lower control arms each $70

cross member $100

rear upper control arms each $25

rear lower control arms each $70

power steering rack $150

Hicas $50

heater core 100

nismo wheels $1600

taillights $130 each

power window reg $150

ignition barrel plus door locks $170

blinkers switch on dash $40

ac display $120

rear bar $200

rear bar reinforcement $120

boot $600 with wing

boot shocks $70

doors $400 each

rear cut $1000

beaver panel $750

fuel flap $30

fuel cap $20

battery holder $20

washer bottle $50

radiator overflow $50

glass from $100

fuel tank $50

fuel pump $50

door trims $400 front and rear set immaculate

boot trims $100

interior light $20

seat belts (all 5 ) $150

dash $200

air bags $300

seats (front & back) $400 immaculate

antenna $50

call me on 0426504272 car is in Liverpool area

can post anything you want as well

Edited by anthony84
  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Hey Mate, I'm interested in the front brake calipers. Do they come with the bolts? Whats the lowest you'll do posted to 3021 VIC?

Cheers, Jason

PS: Your inbox is full

hey mate,

does nismo springs and shocks does that mean springs and 'coilovers'?

what is the age of them??

also nismo wheels, what model?? and tyre thread on them??

could you pm me some info on them??

Do you have the abs module ( alloy block in engine bay with 3 plugs)? how much

And abs wheel sensors 4 of them ?

the ecu on the right side of the boot on the back of the seat ( silver box ?

cheers

fyi.,,,

Some people might not realize series 2 car parts dont interchange with series 1 !!! Windows switches and electronics are way different they went to surface mount components and they wont work at All on cars pre8/2000

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...