Jump to content
SAU Community

Recommended Posts

Hey,

I can do 6x of the BOSCH 2200cc injectors for $830 incl. delivery.

This would include extensions to suit either 11mm or 14mm o-ring size and Denso plug's.

Let me know what you think,

Brendan

(VM)

hey brendan can i grab x6 1600cc to suit/fit a vq35det and pm me your bank details

thanks

rossi

  • Replies 191
  • Created
  • Last Reply

Top Posters In This Topic

hey brendan can i grab x6 1600cc to suit/fit a vq35det and pm me your bank details

thanks

rossi

U have a new PM :yes:

  • 2 weeks later...

Price please on 6 x 650cc (or there abouts) top feed injectors for ER34 RB25T NEO (Direct fit)

Hey!

How about some 725cc BOSCH EV14's, they won't be a straight fit but very close to. Very common upgrade injectors like the ID unit's.

I can do a set of 6x with extensions and plugs for $640 incl. delivery.

Let me know,

Brendan

(VM)

  • 2 weeks later...

Can I please get a price on 550cc x 6 to suit rb25, and if you do 740-750cc can I get a price on them also, cheers :)

Hi mate,

Sure thing are these R34 top feed unit's or side feed?

Cheers,

Brendan

(VM)

Ah my apologies, rb25 s1, top free to suit 11mm o ring (hks rail)

R33.

Cheers

Ok that makes things easier!

A full set of 6x EV14 BOSCH injectors would be the way to go.

These would be come with extensions to suit 11mm o-ring and plugs.

For 550cc would be $560, or 725cc would be $600.

Let me know what you think,

Brendan

(VM)

Hey mate in response to the convo,

Are you located in Sydney? These injectors will fit the top feed hks rail on a greddy plenum yes? Also you mentioned extensions, Assuming they this is for the electrical plugs?

Thanks,

Gav.

Was meant as a pm but for some reason wouldn't work.. Lol

haha all good.

We are located in Melbourne, and the extensions turn the injectors into a full size unit (11mm o-ring or 14mm o-ring) and the plugs are US CAR ones.

- Brendan

(VM)

Ah ok sweet, sorry I'm not overly teched up on electrical looms n plugs names / models? Will they plug in to the existing loom on the stock rb25 s1 harness?

Sorry to be a pain mate, just looking for a direct fit,

Cheers

Ah ok sweet, sorry I'm not overly teched up on electrical looms n plugs names / models? Will they plug in to the existing loom on the stock rb25 s1 harness?

Sorry to be a pain mate, just looking for a direct fit,

Cheers

Hi,

All good, na in most cases you will need to hard-wire it with the plug supplied.

- Brendan

(VM)

Ok Kool so I just had a good talk to the shop tuning my car today, I'm going to go for 1000cc injectors, I need something to fit top feed, 11mm o ring and to suit loom or if not supply plugs to be re wired ect... If I could grab a price that would be great,

Also whets the shipping turnaround time on these to Sydney? Cheers




  • Similar Content

  • Latest Posts

    • You know what, I am enjoying your updates, but I have to say it is pretty poor form to walk into a shop that is paying for space and stock on the floor, try all their seats to work out what you are happy with, then buy somewhere else. If everyone did that the shop will be out of business with no opportunity for anyone to try a seat before buying. 👎  
    • Good work, and thanks for posting up your solution for future people!
    • Yeah mate that’s the plan, I just want something I can have fun in and work on during weekends.  There’s really only 1 road fit to drive the car on and luckily is been redone recently.  I do want to tune it next year sometime, no dynos here so I’m looking at an ECU that can be remote tuned. 
    • To what gain?
    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
×
×
  • Create New...