Jump to content
SAU Community

Recommended Posts

Hey all,

I recently bought a 95 r33 GTS-T and got my grandfather (mechanic but knows nothing about turbo's) to change my oil and oil filter. I saw him pour just over 4 litres in and thought 'isn' t that too much?' the oil checker showed full.

Then I installed a second hand bleed valve and just guessed the correct measurement, gave it flat stick and noticed that the needle had moved up to the line inbetween 0 to 7 mmhg. This line equates to roughly 11 psi if i'm not mistaken seeing as 7mmhg is equivilant to like 14.7 or 14.9 psi? 1 bar! Anway, Thrilled with the massive power increase I took it up to 4th gear twice. Then I took the bleedvalve off to try and feel the power difference. To my HORROR and shock I noticed a huge cloud of smoke blowing out of my exhaust. Now I'm burning up oil and the smoke is still there. (although the smoke isn't as bad as when it first happened). I thought the problem went away because it was still spooling fine on stock boost and couldn't really see the smoke anymore but that night I went to the runs, and noticed my oil went from full to low. It's burning oil and I assume I've blown a turbo seal. Okay now here's the question:

1) Does anyone know a good mechanic?

2) What do I do? :D

3) How much do you think it will cost assuming turbo needs replacing?

Link to comment
https://www.sau.com.au/forums/topic/39696-burning-oil/
Share on other sites

you can go to my cousin at bt motorsport in smithfield he can fix your car up good as new or even give you a quote for the work, he's already dont a few skylines and he maintains my car every month, private message me and ill give you the contact info. as a former resident of livo i know most of the repairers and not many know whats happening around turbos, and please if your gonna go to get a few people to look at it make sure its not a mechanic which is linked to a petrol station casue they have no idea whats happening.

Link to comment
https://www.sau.com.au/forums/topic/39696-burning-oil/#findComment-809058
Share on other sites

you can go to my cousin at bt motorsport in smithfield he can fix your car up good as new or even give you a quote for the work, he's already dont a few skylines and he maintains my car every month, private message me and ill give you the contact info. as a former resident of livo i know most of the repairers and not many know whats happening around turbos, and please if your gonna go to get a few people to look at it make sure its not a mechanic which is linked to a petrol station casue they have no idea whats happening.

Thanks wreckedhead, I'll take you up on that!

Link to comment
https://www.sau.com.au/forums/topic/39696-burning-oil/#findComment-809094
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...