Jump to content
SAU Community

Recommended Posts

I have these parts left over from my car, I don't need them, they are either brand new or in perfect condition.. I don't sell junk.

Parts to suit GTR R32/33

I wont take stupid offers the prices are firm.

1. Ikeya Formula rear Lower control arms, will suit GTR R32-33-34 these are brand new.. $1100 plus shipping

2. Moon racing Billet Superlap Hicas lock out bar brand new ( they dont make these any more)....... $650 plus shipping

3. GTR R32-33 front transfer case to diff drive shaft perfect condition....... $150 plus shipping

4. GTR R34 V spec front/ rear Brembo brakes, the rotors are in perfect condition, ( I don't have the front Calipers) rear's come with 2 sets brake pads, brake lines, and brackets... will bolt on to GTR R32-33-34......... $1300 plus shipping

5. Genuine Nissan RB 26 front timing cover perfect condition.....$100 plus shipping

6. Engine damper ( blue anodised) complete with brackets to suit GTR R34 but will bolt to any GTR....$50 plus shipping

Dont text me if you don't have the money or make a stupid offer... these are the best quality parts.

If you want photos of the parts text me your e mail and I will send them to you.

Dave 0412 950192

I have these parts left over from my car, I don't need them, they are either brand new or in perfect condition.. I don't sell junk.

Parts to suit GTR R32/33 and 34

I wont take stupid offers the prices are firm.

1. Ikeya Formula rear Lower control arms, will suit GTR R32-33-34 these are brand new.. $1100 plus shipping

2. Moon racing Billet Superlap Hicas lock out bar brand new ( they dont make these any more)....... $650 plus shipping

3. GTR R32-33 front transfer case to diff drive shaft perfect condition....... $150 plus shipping ( sold )

4. GTR R34 V spec front/ rear Brembo brakes, the rotors are in perfect condition, ( I don't have the front Calipers) rear's come with 2 sets brake pads, brake lines, and brackets... will bolt on to GTR R32-33-34......... $1300 plus shipping

5. Genuine Nissan RB 26 front timing cover perfect condition.....$100 plus shipping

6. Engine damper ( blue anodised) complete with brackets to suit GTR R34 but will bolt to any GTR....$50 plus shipping

Bump.....

Hi Cas lock bar sold pending payment.....

Price drop for Ikeya suspension arms.......$1000 for the set. ( will fit GTR R32-33 and 34) brand new..

This seems typical people hassle for the best price then have no money...

Hi Cas bar still for sale.

looks like the 33/34 gtr has the same rear arms, but 32 is different.

Can you please confirm part number.

Part number is IFAO 16004 but you will find that the GTR R32 ( IFAO16003 ) is now 16004 but call Ikeya and find out.

Cheers Dave

Cheers Dave

I have these parts left over from my car, I don't need them, they are either brand new or in perfect condition.. I don't sell junk.

Parts to suit GTR R32/33 and R34

1. Ikeya Formula rear Lower control arms, will suit GTR R32-33-34 these are brand new.. $1100 plus shipping

GTR R34 V spec front/ rear Brembo brakes, the rotors are in perfect condition, ( I don't have the front Calipers) rear's come with 2 sets brake pads, brake lines, and brackets... will bolt on to GTR R32-33-34......... $1300 plus shipping

Genuine Nissan RB 26 front timing cover perfect condition.....$100 plus shipping

Engine damper ( blue anodised) complete with brackets to suit GTR R34 but will bolt to any GTR....$50 plus shipping

Dont text me if you don't have the money or make a stupid offer... these are the best quality parts.

If you want photos of the parts text me your e mail and I will send them to you.

Dave 0412 950192

1. Ikeya Formula rear Lower control arms, will suit GTR R32-33-34 these are brand new.. $1100 plus shipping

GTR R34 V spec front/ rear Brembo brakes, the rotors are in perfect condition, ( I don't have the front Calipers) rear brakes come with 2 sets brake pads, brake lines, and brackets... will bolt on to GTR R32-33-34......... $1300 plus shipping

Genuine Nissan RB 26 front timing cover perfect condition.....$100 plus shipping

Engine damper ( blue anodised) complete with brackets to suit GTR R34 but will bolt to any GTR....$50 plus shipping

these are the best quality parts.

If you want photos of the parts text me your e mail and I will send them to you.

Dave 0412 950192

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...