Jump to content
SAU Community

Recommended Posts

Hey guys

Few left over bits and pieces from my car up for sale.

R33 Chromed Intake Runners

Spent weeks sanding smooth the runners and polishing them before getting them chrome dipped to match my Plazmaman plenum. The chroming cost me more than the price i'm asking!

First photo is as they sit at the moment. Needs some metal polish and a rag to buff them up to be 100% as seen in the other two photos.

dsc01455o.jpg338220309460317636afo.jpg3381385307f0bb73a291o.jpg

60mm Blitz AC Series Mechanical Boost Gauge $150

60mm Blitz AC Series Electric Exhaust Gas Temp Gauge $150

Will do both for $250

Very hard to get gauges now as Blitz no longer make them. Fit perfectly in a Greddy A pillar gauge. One of my very gauges and they illuminate a gorgeous white with red needle at night time.

post-35676-0-24994500-1334393754_thumb.jpg

40mm Cooling Pro Alloy Radiator (fits factory shroud)

Good upgrade to the factory item and fits perfectly with all the factory gear.

Nismo/Tomei R33 GTST Fuel Pump (direct plug and play)

Very easy install and good for over 300rwkw on a GTST. Will also suit a S14 Silvia. Very quite unit that is one of the best fuel pump upgrades available.

post-35676-0-41674200-1334393818_thumb.jpg

Greddy Turbo Timer Black $40

Your normal Greddy turbo timer that every one has. Has a bunch of extra features like lap timer, 0-100, voltage display etc.

Nos Nitrous Universal Wet Kit

Comes with a purge kit and also a 3/4 filled bottle. Jetting is from 50-150HP and can be installed very easily on any EFI car with just a tee piece from a fuel line. No tuning required.

(Please note this can not be freighted and only local pickup is available)

All items are located in Townsville North QLD and can freight Australia wide with E-go for cheap (other than the nitrous kit).

Any questions just feel free to ask. Will take some more photos of the other items this weekend.

Cheers

Phil

It's used buddy. Out of my R33 GTST Skyline. Only getting rid of it because I parted my car out.

Has done probably 20,000km. Looks basically new.

Can chuck a photo up tomorrow if you want.

Nah that's cool. By the time I added in postage i'd be better off getting a new one.

Thanks for the reply though.

Can do it for $220 delivered if you want.

They are $320 brand new from Just Jap plus freight, so maybe $350. Still a good saving.

Food for thought.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...