Jump to content
SAU Community

Recommended Posts

Greddy engine oil cap $40

Mazda Air temp sensor (for PowerFC D-Jetro) (brand new) $120

S14 C's short shifter $150

S14/s15 Cusco Rear strut tower brace $180

S14/s14a genuine ganador mirrors (black) rough paint, need repainting $180

S14/S15 Nismo springs and struts (lower than factory, very comfortable on street) $550

S14a HKB boss kit with airbag light cancel resistor plug (brand new) $180

S14 Sniper Racing Carbon fibre trunk (wet layup carbon, no brake light hole) (brand new) $450

S14 'Edge' Side skirts, unpainted white gelcoat (brand new) $250

S14.5 Origin +25mm conversion fenders (brand new) $450

S14 Origin +50mm rear fenders (brand new) $450

S14 light weight fibreglass doors (brand new) $900

S14 Full Lexan window kit (rear window with NACA vents, rear quarters, driver and passenger door windows with slider window kits) (brand new) $1,000

S14 Nismo Super Coppermix TWIN PLATE clutch rated to 670hp, one of the best SR clutches available (brand new) $2,100

S15 factory rear boot spoler with led's, pewter colour $120

S15 JDM factory steering wheel with airbag $250

S15 Hybrid aluminium radiator $250

S15 Stage21 aero front bar (painted blue) $350

S15 boot lid and ducktail spoiler (not separating, duck tail is sikaflex'd and bolted on to boot lid) $300

S15 Alcon front brake kit, monoblock aluminium 4-pot calipers (weigh less than stock calipers!), 335mm 2-piece rotors, Ferrodo DS2500 pads $3500 (new price from PWR is $4300)

S13/180sx TRUST 19 row oil cooler kit, thick quality trust core, for S13/180sx with filter relocator $700

C-west genuine carbon fibre GT-wing, mounted on S15 boot lid, wrapped in matte black vinyl $1,100

Hypertune SR20 low port intake plenum (small dent at one end) + 77mm Hypertune throttle body $1,700 (Hi Octane Direct sell the plenum alone for $1800+ and $600 for the throttle body)

HKS Super Sequential SQV BOV, genuine HKS, mounted on evo 8/9 hot pipe $300

PWR custom intercooler 600 x 300mm x 74mm core $600

STACK 8130 dash with sensors and loom $1,800

ATP 'Frank' turbo, with stainless steel manifold, will fit s14/15 SR20det, good for around 240-250rwkw with stock cams. Braided lines included. $1100ono

R34 GTR Cusco Type-40 aluminium strut tower brace $240

R34 GTR C-west N1 front bar (genuine), carbon fibre (painted black), will need respray/minor repairs $750

R34 GTR C-west carbon fibre cannards for N1 bar $350

R34 GTR Nismo dash cluster (black version) (brand new) $700

R34 GTR/GTT Nismo GT LED tail lights $1,200

4x Advan AD08 265/35/18 tyres 99% tread (almost new, less than 300km) travelled $1400

RAYS Nismo LMGT4's white 17 x 9 +22 all round, no tyres, concave spokes, clears GTR brembo and Alcon brakes to 335mm rotor $2,300

RAYS Nismo LMGT4's bronze 18 x 9 +22 all round with Advan v103 sport tyres about 50% tread, concave spokes $2,800

RAYS LE37's Top Secret Limited Edition Gold 18 x 10.5 +15 all round (rare, don't really want to sell these) $4000

SSR Type-C 17 x 9.5 +15 PAIR ONLY, white, average condition for age, no buckles $1100

** can post wheels interstate if needed at buyers cost **

Parts are used unless stated brand new

Pickup available from Melbourne, St Kilda/Prahran area

Not willing to post large/heavy/fragile items interstate (unless you arrange your own courier)

Buyers in Australia only - no international inquiries thanks

Photos of most items here, email me if not - http://s1116.photobucket.com/albums/k569/jdm7777/

Email [email protected]

  • Replies 151
  • Created
  • Last Reply

Top Posters In This Topic

can do a slight discount if buying multiple items..... make an offer, all has to go! the worst I can say is no... LOWBALLERS come at me! :P

pffft. why would i trade for inferior tyres. PASS

maybe you have another car thats a daily you dont want to waste semi's on and have cash your way... they are a fantastic tyre for their class, one of the best in their category for the money they are. Comparable to PS2....

Nope not interested thanks.

*** S14 ganador mirrors sold

*** S14 carbon boot lid sold

*** PWR intercooler sold

ok fair enough.

$800 if you dont get any offers, what i just paid for a set of RS3 265/285 new.. im in no hurry even if u have them 6 months from now offer still stands if i dont find another set cheap.

Hey, slightly off topic, do you have a tailshaft for sale? And do you know if r34 front & s15 rear connections are different? I am going with r34 box & s15 diff.

Cheers.

Hey mate , tried PM'ing but says you can't receive messages, anyway interested in the Nismo cluster , sms me on 0434112724 , ill pick it up from your area for $700.

Thanks , Johnny

nismo cluster sold - Cheers Johnny, nice to meet you mate :)

pics of lmgt4's 18x9 +22 with advan v103 tyres $2800

ATP 'frank' turbo + stainless steel manifold, oil and water lines included. $1100

pair of SSR type-c wheels 17x9.5 +15 offset, weigh only 7.8kg each $1200 for the pair

all other items for sale unless i've said sold - pics in the link above.

My inbox is full on purpose, email me instead [email protected] <-- two zero's in boost

post-10650-0-46883400-1336800541_thumb.jpg

post-10650-0-67941700-1336800559_thumb.jpg

post-10650-0-41594600-1336800639_thumb.jpg

post-10650-0-69911600-1336800655_thumb.jpg

post-10650-0-49001600-1336800674_thumb.jpg

post-10650-0-45984500-1336800687_thumb.jpg

any idea on frieght costs to S.A for the lexan window kit?

Freight would be only about $50 to Adelaide via Transdirect, as they are quite light weight.

RoadExpress is an estimated 1-2 business day service and includes a conditional Transit Warranty.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...