Jump to content
SAU Community

Recommended Posts

Greddy engine oil cap $40

Mazda Air temp sensor (for PowerFC D-Jetro) (brand new) $120

S14 C's short shifter $150

S14/s15 Cusco Rear strut tower brace $180

S14/s14a genuine ganador mirrors (black) rough paint, need repainting $180

S14/S15 Nismo springs and struts (lower than factory, very comfortable on street) $550

S14a HKB boss kit with airbag light cancel resistor plug (brand new) $180

S14 Sniper Racing Carbon fibre trunk (wet layup carbon, no brake light hole) (brand new) $450

S14 'Edge' Side skirts, unpainted white gelcoat (brand new) $250

S14.5 Origin +25mm conversion fenders (brand new) $450

S14 Origin +50mm rear fenders (brand new) $450

S14 light weight fibreglass doors (brand new) $900

S14 Full Lexan window kit (rear window with NACA vents, rear quarters, driver and passenger door windows with slider window kits) (brand new) $1,000

S14 Nismo Super Coppermix TWIN PLATE clutch rated to 670hp, one of the best SR clutches available (brand new) $2,100

S15 factory rear boot spoler with led's, pewter colour $120

S15 JDM factory steering wheel with airbag $250

S15 Hybrid aluminium radiator $250

S15 Stage21 aero front bar (painted blue) $350

S15 boot lid and ducktail spoiler (not separating, duck tail is sikaflex'd and bolted on to boot lid) $300

S15 Alcon front brake kit, monoblock aluminium 4-pot calipers (weigh less than stock calipers!), 335mm 2-piece rotors, Ferrodo DS2500 pads $3500 (new price from PWR is $4300)

S13/180sx TRUST 19 row oil cooler kit, thick quality trust core, for S13/180sx with filter relocator $700

C-west genuine carbon fibre GT-wing, mounted on S15 boot lid, wrapped in matte black vinyl $1,100

Hypertune SR20 low port intake plenum (small dent at one end) + 77mm Hypertune throttle body $1,700 (Hi Octane Direct sell the plenum alone for $1800+ and $600 for the throttle body)

HKS Super Sequential SQV BOV, genuine HKS, mounted on evo 8/9 hot pipe $300

PWR custom intercooler 600 x 300mm x 74mm core $600

STACK 8130 dash with sensors and loom $1,800

ATP 'Frank' turbo, with stainless steel manifold, will fit s14/15 SR20det, good for around 240-250rwkw with stock cams. Braided lines included. $1100ono

R34 GTR Cusco Type-40 aluminium strut tower brace $240

R34 GTR C-west N1 front bar (genuine), carbon fibre (painted black), will need respray/minor repairs $750

R34 GTR C-west carbon fibre cannards for N1 bar $350

R34 GTR Nismo dash cluster (black version) (brand new) $700

R34 GTR/GTT Nismo GT LED tail lights $1,200

4x Advan AD08 265/35/18 tyres 99% tread (almost new, less than 300km) travelled $1400

RAYS Nismo LMGT4's white 17 x 9 +22 all round, no tyres, concave spokes, clears GTR brembo and Alcon brakes to 335mm rotor $2,300

RAYS Nismo LMGT4's bronze 18 x 9 +22 all round with Advan v103 sport tyres about 50% tread, concave spokes $2,800

RAYS LE37's Top Secret Limited Edition Gold 18 x 10.5 +15 all round (rare, don't really want to sell these) $4000

SSR Type-C 17 x 9.5 +15 PAIR ONLY, white, average condition for age, no buckles $1100

** can post wheels interstate if needed at buyers cost **

Parts are used unless stated brand new

Pickup available from Melbourne, St Kilda/Prahran area

Not willing to post large/heavy/fragile items interstate (unless you arrange your own courier)

Buyers in Australia only - no international inquiries thanks

Photos of most items here, email me if not - http://s1116.photobucket.com/albums/k569/jdm7777/

Email [email protected]

  • Replies 151
  • Created
  • Last Reply

Top Posters In This Topic

can do a slight discount if buying multiple items..... make an offer, all has to go! the worst I can say is no... LOWBALLERS come at me! :P

pffft. why would i trade for inferior tyres. PASS

maybe you have another car thats a daily you dont want to waste semi's on and have cash your way... they are a fantastic tyre for their class, one of the best in their category for the money they are. Comparable to PS2....

Nope not interested thanks.

*** S14 ganador mirrors sold

*** S14 carbon boot lid sold

*** PWR intercooler sold

ok fair enough.

$800 if you dont get any offers, what i just paid for a set of RS3 265/285 new.. im in no hurry even if u have them 6 months from now offer still stands if i dont find another set cheap.

Hey, slightly off topic, do you have a tailshaft for sale? And do you know if r34 front & s15 rear connections are different? I am going with r34 box & s15 diff.

Cheers.

Hey mate , tried PM'ing but says you can't receive messages, anyway interested in the Nismo cluster , sms me on 0434112724 , ill pick it up from your area for $700.

Thanks , Johnny

nismo cluster sold - Cheers Johnny, nice to meet you mate :)

pics of lmgt4's 18x9 +22 with advan v103 tyres $2800

ATP 'frank' turbo + stainless steel manifold, oil and water lines included. $1100

pair of SSR type-c wheels 17x9.5 +15 offset, weigh only 7.8kg each $1200 for the pair

all other items for sale unless i've said sold - pics in the link above.

My inbox is full on purpose, email me instead [email protected] <-- two zero's in boost

post-10650-0-46883400-1336800541_thumb.jpg

post-10650-0-67941700-1336800559_thumb.jpg

post-10650-0-41594600-1336800639_thumb.jpg

post-10650-0-69911600-1336800655_thumb.jpg

post-10650-0-49001600-1336800674_thumb.jpg

post-10650-0-45984500-1336800687_thumb.jpg

any idea on frieght costs to S.A for the lexan window kit?

Freight would be only about $50 to Adelaide via Transdirect, as they are quite light weight.

RoadExpress is an estimated 1-2 business day service and includes a conditional Transit Warranty.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
    • It sounds like you want what the Toyota Landcruisers have for their roof racks. Wanna know what you end up with? Rust holes in the roof, and water everywhere...
    • Discovered today that if I select reverse first and take my foot off the brake, then select drive, the drive indicator light works and so does the tiptronic gear indicator. 
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Does anyone here have any ideas?   Cheers guys
×
×
  • Create New...