Jump to content
SAU Community

help please oh god some1 help meeee! =p

robert112
 Share

Recommended Posts

robert112 Apprentice

robert112

Posted
Posted

Hey all,

I recently bought a 95 r33 GTS-T and got my grandfather (mechanic but knows nothing about turbo's) to change my oil and oil filter. I saw him pour just over 4 litres in and thought 'isn' t that too much?' the oil checker showed full.

Then I installed a second hand bleed valve and just guessed the correct measurement, gave it flat stick and noticed that the needle had moved up to the line inbetween 0 to 7 mmhg. This line equates to roughly 11 psi if i'm not mistaken. Thrilled with the massive power increase I took it up to 4th gear twice. Then I took the bleedvalve off to try and feel the power difference. To my HORROR and shock I noticed a huge cloud of smoke blowing out of my exhaust. Now I'm burning up oil and the smoke is still there. (although the smoke isn't as bad as when it first happened). I thought the problem went away because it was still spooling fine on stock boost and couldn't really see the smoke anymore but that night I went to the runs, and noticed my oil went from full to low. It's burning oil and I assume I've blown a turbo seal maybe? Okay now here's the question:

1) Does anyone know a good mechanic?

2) What do I do?

3) How much do you think it will cost assuming turbo needs replacing?

DentonR33 Rising Star

DentonR33

Posted
Posted

I'd have a guess and say that you would be up for an engine rebuild :(

you have probably blown a piston ring

Stock fuel pumps arent that good and increasing boost without a tune is a recipe for detonation, especially 4th gear runs..

MSPEC Mentor

MSPEC

Posted
Posted

If the engine sounds okay you might be right, more like the turbo. The turbo can burn lots ot oil very quickly creating lots of smoke :( So this could be the problem, for your sake lets hope so!

otto Collaborator

otto

Posted
Posted

If you definatly know its the turb and you do the work yourself you will get away with it for whatever you pick the std turbo up for see in the for sale section. If there isnt one for sale do a search there would have been in the past and it will give you an idea of what there worth.

The job is pretty sraight forward (just 4 lines with banjo fittings and bolts and hose clamps hear and there to attach manifolds etc. from memory) its abit fiddly but you save $$$ and get the satasfaction of doin it yourself and learn abit more about your car.

Dont know how much a mec would charge have to be afew hours at least.

Good luck, hope it doesnt end up being anything to serious.

Theres a good chance its not gonna be anything to serious with the engine if youve still got std ecu correct me if im wrong but if you dialed in tomuch boost you would have hit fuel cut well before the std pump ran out of huff, i mean whats the point in nissan putting that sort of protection on the car if its gonna lean out and destroy the engine before it kicks in. The std ecu is very protective of the engine but i guess anything can happen

BigDatto Proficient

BigDatto

Posted
Posted

Tell your Grandpa to do a compression test. If that checks out, your problem is most likely turbo related. Provided a wheel hasn't contacted a housing, it can be rebuilt & balanced to better than factory specs for very reasonable cost.

Hope that helps ya out, Bro.

51jay Mentor

51jay

Posted
Posted

(the line inbetween 0 to 7 mmhg. This line equates to roughly 11 psi if i'm not mistaken.)

6 or 7psl would be more accurate. 7mmhg is about 14.5psi. and the only line between 0 and 7 is halfway inbetween. B est advice I can give you is..........

1) STOP making assumptions

2) Forget all the advice you've just read in this thread

3) Search this forum to find a "well thought of workshop"

4) Go to them before you do anything else stupid

xRHETTx Mentor

xRHETTx

Posted
Posted
(the line inbetween 0 to 7 mmhg. This line equates to roughly 11 psi if i'm not mistaken.)

 6 or 7psl would be more accurate.   7mmhg is about 14.5psi. and the only line between 0 and 7 is halfway inbetween.    B est advice I can give you is..........

1)  STOP making assumptions

2)  Forget all the advice you've just read in this thread

3)  Search  this forum to find a "well thought of workshop"

4)  Go to them before you do anything else stupid

:werd:

robert112 Apprentice

robert112

Posted
  • Author
Posted

thank you every1

I believe my engine is fine because I still have power and no sounds at all.

I can rev the **** out of it up to 7 grand, it performs great.

Oil burns, so I think OTTO is right about the turbo burning up the oil.

HOPEFULLY ! hehe

what i would do is take it to a mechanic and get them to tell you whats wrong with it. pay them the money and then you go out and fix the problems yourself.

There is plenty of stuff in these forums going to sale.

Yes LAL thanks for that advise I think I will do that actually.

Steve Grand Master

Steve

Posted
Posted
Now I'm burning up oil and the smoke is still there. (although the smoke isn't as bad as when it first happened).  

Do you have oil coming out of your BOV? Higher boost means more blow by, which means more oil through the intake. This can cause alot of oil to be burnt.

If you think you can give it a go (get grandad to help) try pulling an intercooler pipe off, and checking for oil inside it. If you can find alot of oil there, that MAY be your problem, esp if everything else is ok except for the smoke.

If there is oil through the pipes, clean them out. Also, remove the intercooler and give it a flush with metho or similar - clean all the sh1t out.

If you ever have to turn up the boost again, fit a decent catch can. Not always necessary, but better safe than sorry. Oil mixing with the intake charge isnt ideal.

OR, as Neil points out, take your car to an appropriate mechanic.

Debo Rookie

Debo

Posted
Posted

I am running 14 psi on my gtst. Have no problems now. Have a duel stage turbo smart controler. All i had to do was change the spark plugs and put the right gap on them. Also get the timing right. Running standed ecu and intercooler. Don't get fuel cut in any gear apart from 5th and that is only of doing 100 to 125 kms after that fine. For any more details goto http://www.mrdperformance.biz/ they to all the work on my car

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...