Jump to content
SAU Community

Need Help With My 34 Gtt

RDIRTY4

By RDIRTY4,
in Western Australia

 Share

Recommended Posts

RDIRTY4 Apprentice

RDIRTY4

Posted
Posted

Well, firstly my name Is Peter and I've been reading up on SAU religiously each night after work.

So the story goes.... I saw a thread on the Kando range of turbo's and decided to take a read through, this made me go out and buy a T67 to slap on the 34.

As ambitious as i was to do all the work myself..... I've come into a bit of a situation where i need my car back on the road asap. There are a few things i would need help with, eg. vacuum lines, hooking up the ebc and taking out the water lines that the stock turbo utilized, etc. If I had the mullah I'd be more than happy to take it to a workshop to get it finished....... but I'm an apprentice (dont think i have to elaborate there haha).

I have already got all the supporting mods installed (apexi pfc, 60lb siemen dekas, deatschwerks 300lph pump)

If anyone is willing to help out I'm sure i can either pay you a bit or supply beer of your choice.

Im located in Bassendean (NOR).

Sorry if I've missed any info....

Cheers, Peter

post-88785-0-82534700-1335698005_thumb.jpgpost-88785-0-02551300-1335698099_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/398931-need-help-with-my-34-gtt/
Share on other sites
Hanaldo Grand Master

Hanaldo

Posted
Posted

Well, firstly my name Is Peter and I've been reading up on SAU religiously each night after work.

So the story goes.... I saw a thread on the Kando range of turbo's and decided to take a read through, this made me go out and buy a T67 to slap on the 34.

As ambitious as i was to do all the work myself..... I've come into a bit of a situation where i need my car back on the road asap. There are a few things i would need help with, eg. vacuum lines, hooking up the ebc and taking out the water lines that the stock turbo utilized, etc. If I had the mullah I'd be more than happy to take it to a workshop to get it finished....... but I'm an apprentice (dont think i have to elaborate there haha).

I have already got all the supporting mods installed (apexi pfc, 60lb siemen dekas, deatschwerks 300lph pump)

If anyone is willing to help out I'm sure i can either pay you a bit or supply beer of your choice.

Im located in Bassendean (NOR).

Sorry if I've missed any info....

Cheers, Peter

post-88785-0-82534700-1335698005_thumb.jpgpost-88785-0-02551300-1335698099_thumb.jpg

Was the boost controller already hooked up, so it's just a case of plumbing it in again? Which vacuum lines need doing?

RDIRTY4 Apprentice

RDIRTY4

Posted
  • Author
Posted

Was the boost controller already hooked up, so it's just a case of plumbing it in again? Which vacuum lines need doing?

Hey martin, I just realised that you posted a thread about hooking up the EBC to the external gate.... And, yes I already had an EBC hooked up before. Derp on my behalf haha.... Just read through it and sourced all the info i need. Cheers.

As for the vacuum lines..... I'll take a photo of what I'm talking about when I'm home next (Friday, after work). Hopefully you will be able to shed some light on what exactly it is that these lines do.

Be nice once u get it all together!

Cheers Monkey. It will be legen....... wait for it...... DARY DARY!

Hanaldo Grand Master

Hanaldo

Posted
Posted

Hey martin, I just realised that you posted a thread about hooking up the EBC to the external gate.... And, yes I already had an EBC hooked up before. Derp on my behalf haha.... Just read through it and sourced all the info i need. Cheers.

As for the vacuum lines..... I'll take a photo of what I'm talking about when I'm home next (Friday, after work). Hopefully you will be able to shed some light on what exactly it is that these lines do.

No problem man, glad someone else found that info useful :thumbsup:

And yeh, happy to help in any way I can, it should all be fairly straight forward.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...