Jump to content
SAU Community

Still Stalling Rb25Det

ccampy456

By ccampy456,
in Western Australia

 Share

Recommended Posts

ccampy456 Newbie

ccampy456

Posted
Posted

Ok so my car began stalling one day after a run up in the hills. I read up on here and found a whole heap of things it could be. i have tried just about all of them i believe and im still getting the stalling issue. wondered if anyone here may have any other random idea that could fix the issue. for the record its a stock s2 33 with the boost solenoid grounded to 7 psi, a pod filter and that is about it on my daily machineee.

cheers in advance guys :rolleyes:

Link to comment
https://www.sau.com.au/forums/topic/399651-still-stalling-rb25det/
Share on other sites
ccampy456 Newbie

ccampy456

Posted
  • Author
Posted

ah cas yea i do know what a cam angle sensor is, didnt twig on the abriviation sorry haha. thats a good point actually i havent checked it. willl swap with someone and see if it fixes the problem. and boss zilla, at the time it had an atmo bov on for a while with no issues up until that day, i reverted back to stock after that thinking it was the bov but still no change! the stalling is usually when coming out of a gear with a bit of load usually has to have been on boost and let back down to idle to stall but being stock boost comes in around 2grand so thats pretty much all the time. thanks guys!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...