Jump to content
SAU Community

Recommended Posts

Hey guys im getting some funny noises from my gearbox (R33). I can only hear it when the car is warm, when idiling in neutral with the clutch pedal out there is a squeek coming from the box but it goes away when i push the clutch in. Any ideas?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/399858-squeak-from-transmission/
Share on other sites

Hey guys im getting some funny noises from my gearbox (R33). I can only hear it when the car is warm, when idiling in neutral with the clutch pedal out there is a squeek coming from the box but it goes away when i push the clutch in. Any ideas?

Thanks

Thrust bearing. Very very common.

It's not a huge problem. It's not going to force you to pull the gearbox. It's not going to force you to rebuild the gearbox. It will get worse over time. It might fail. It would be better to replace it than leave it for a long time. If you are pulling the gearbox to rebuild it then it is trivial to replace the throwout bearing. If you are not going to pull the gearbox to rebuild it, then pulling the gearbox to replace the throwout will add some cost and effort, but it's not going to bankrupt you.

Yeh as said, replace it if you're going to have the box out anyway. It's a $60 or so part, so not like it's a massive problem. But mine has been making the whirring noise for a good 2 years now. It hasn't got any worse in that time, so I haven't bothered pulling it out. If it starts to get louder then I'll pull the box and replace it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
    • Thanks mate, well done to you too! Yeah not looking forward to doing any major work to it!
×
×
  • Create New...