Jump to content
SAU Community

Recommended Posts

g'day all

just made a recent purchase of an FMIC and its time for the piping to be done.

i have fitted (or will be) the cooler and cut the front bar so it all fits but my plan of running the outlet from the cooler back behind the cooler and into the stock return pipes is not going to work. I think i'm going to cut a hole in the metal under the battery facing the alternator (not the chassis!) and run the outlet pipe in front on the cam gears and into the stock return piping.

bad idea? good idea? it seems this is what most have done. Will paint black for 'stealth' look :) .

next question is about getting piping made. I have done a search and come up with the following places:

- ICE performance

- VMS in west footscray

- Dande exhausts

i'm thinking i won't pay more than $400 for just the pipes to be made (no fitting or anything as i'm handy with a spanner or two and won't pay others to do what i can do). will this be a good budget? i don't care if its just mild steel as it will be painted...

or is there someone on here that can do this for me? c'mon there has to be a bloke here that works in an exhaust shop and can do mandrel bends??

ideas welcomed on anything related...

hoping to get this done at the end of the week...

cheers,

Waz.

Link to comment
https://www.sau.com.au/forums/topic/40045-fmic-piping/
Share on other sites

www.trufit.com.au

they did my dump pipe and i recommend them cos they do a good job at a very good price

warren my friend went to trufit with same cooler and they quoted him 350 for his rex

rex needs a lot more bends than skyline i would think

so for the r32 it would cost less

but the thing is they don't want anything to do with cutting front bar and fitting

they jus put the piping around it

but then they are a bit far from ur place

but you can give them a try dude

Link to comment
https://www.sau.com.au/forums/topic/40045-fmic-piping/#findComment-820391
Share on other sites

Guest INASNT
www.trufit.com.au

they did my dump pipe and i recommend them cos they do a good job at a very good price

warren my friend went to trufit with same cooler and they quoted him 350 for his rex

rex needs a lot more bends than skyline i would think  

so for the r32 it would cost less

but the thing is they don't want anything to do with cutting front bar and fitting

they jus put the piping around it  

but then they are a bit far from ur place

but you can give them a try dude

Ice use trufit for some of their cooler/exhaust work and they did some of the ext gate work on my car and they did a very good job.

Link to comment
https://www.sau.com.au/forums/topic/40045-fmic-piping/#findComment-821113
Share on other sites

My tip is not to go to Ice performance.

Why is that?

I'll go out on a limb and say they are one of the most trustworthy places in Vic to take a car.

Real adivce with no :bs!:

They wont sell you something that isnt suited to your application unlike other workshops

Link to comment
https://www.sau.com.au/forums/topic/40045-fmic-piping/#findComment-821917
Share on other sites

hmmm

ICE quoted me about 450-500 for stainless

am still a little dissappointed as i'm not after a show-quality piece of work, just a way to connmect and use the bloody thing!

anyone got any ideas for doing this myself? purchase some mandrel bends and connect them with straight rubber hoses?

will it be really bad if i use press-bends?

my intercooler outlet is 70mm so i was thinking i could get 80mm stainless pipe press-bent into shape by my local exhaust shop so the overall diameter is never less than 70mm anyways... i know flow won't be the best but once the air passes through the throttle body and into the intake plenum it will smooth out anyway i would think...

any more ideas will be great...

Waz.

Link to comment
https://www.sau.com.au/forums/topic/40045-fmic-piping/#findComment-822749
Share on other sites

hey waz, i got quoted around 200 for mine.

i decided to chop and change the way i wanted the piping to run, so i ended up paying clsoe to 250 for mine. got the lot made up in mild steel and was only quoted a little bit more for stainless. i've just managed to get my hands on some wrapping for the pipes, so bling pipes wasn't what i wanted.

exactly as you stated, students on budget... you a biomed grad yet? 3rd year is hardcore, howd u manage to do it? gimmie some help man! hehehe...

i'll post some pics of my piping later today...

Link to comment
https://www.sau.com.au/forums/topic/40045-fmic-piping/#findComment-824260
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...