Jump to content
SAU Community

Recommended Posts

Hey,

Long time lurker here on SAU...

Finally picked up my own Skyline yesterday, a black R32 GTR.

Will have picks soon, need to find some daylight!

Just a question out of curiousity..

It has HKS coilovers, I am looking at purchasing a coilover wrench to adjust them.

To lower it, do I need to take the coilovers out or can it be done from the engine bay/boot?

Pretty new to coilovers usually only had springs/shocks in previous cars!

Thanks

post-81745-0-61279400-1337515329_thumb.jpg

post-81745-0-12332200-1337515339_thumb.jpg

post-81745-0-51163600-1337515468_thumb.jpg

Edited by ls128
Link to comment
https://www.sau.com.au/forums/topic/400642-new-to-sau/
Share on other sites

So they aren't just adjustable from the strut top (i.e engine bay or boot?)

I don't really have the knowledge to take coilovers out without f###ing something up!!!

I forgot to mention theyre HKS Coilovers

from the top, the adjustments will be just to dampener settings.

Taking the coilys out is surprisingly easy; I surprised myself when I swapped mine over that I didn't f**k it up :P Basically you jack the corner up and put it on stands, take the wheel off, and there's one big bolt that holds the bottom of the coilover to the axle, and then the three bolts in the engine bay, and bam out it comes :) but I can understand the hesitation, definitely. Shit if you weren't in the Shire I'd come take a look; a bit far to go after work and I get busy on the weekends going down to the gong heh

Link to comment
https://www.sau.com.au/forums/topic/400642-new-to-sau/#findComment-6365139
Share on other sites

from the top, the adjustments will be just to dampener settings.

Taking the coilys out is surprisingly easy; I surprised myself when I swapped mine over that I didn't f**k it up :P Basically you jack the corner up and put it on stands, take the wheel off, and there's one big bolt that holds the bottom of the coilover to the axle, and then the three bolts in the engine bay, and bam out it comes :) but I can understand the hesitation, definitely. Shit if you weren't in the Shire I'd come take a look; a bit far to go after work and I get busy on the weekends going down to the gong heh

Ah true - I thought so.

So it's not possible to take the wheel off and adjust from there?

I have a few mates who are mechanics, but I don't wanna go to low and screw my handling!

Also after a R32 Gtr front grill - colour doesn't matter, I can paint it. Looked through parts for sale only found one, PM'd him but no reply.

Edited by ls128
Link to comment
https://www.sau.com.au/forums/topic/400642-new-to-sau/#findComment-6365225
Share on other sites

Hmm, trying to remember if it can be done, probably? Someone else could probably give a 100% answer on that. But I think it should be able to be done :) As long as you get the spanners to undo the locking rings, it's worth a shot, just make sure you measure how much further you move it so that you can do it to the other side the same.

Link to comment
https://www.sau.com.au/forums/topic/400642-new-to-sau/#findComment-6365441
Share on other sites

Hmm, trying to remember if it can be done, probably? Someone else could probably give a 100% answer on that. But I think it should be able to be done :) As long as you get the spanners to undo the locking rings, it's worth a shot, just make sure you measure how much further you move it so that you can do it to the other side the same.

Alright thanks mate.

Yeah, looking on ebay for a C spanner...I haven't been able to find one locally (not that I have put heaps of effort into looking)

I haven't actually properly looked at the coilovers yet, do they usually have the model visible with the wheel on? Or is it a matter of removing the wheels and getting right into the wheel well to know what model of HKS coilovers they are..

Yeah, I really just want to see how low down it does go haha

Link to comment
https://www.sau.com.au/forums/topic/400642-new-to-sau/#findComment-6365808
Share on other sites

  • 1 year later...

Alright thanks mate.

Yeah, looking on ebay for a C spanner...I haven't been able to find one locally (not that I have put heaps of effort into looking)

I haven't actually properly looked at the coilovers yet, do they usually have the model visible with the wheel on? Or is it a matter of removing the wheels and getting right into the wheel well to know what model of HKS coilovers they are..

Yeah, I really just want to see how low down it does go haha

some coilovers are easily identifiable by sight (Ohlins, Bilsteins etc) but for most Jap coils, they have a model and then variations: Cusco Zero 1,2, 2e, 2r etc etc.

Best if you get us pics of your coilovers, but to do that you'd need to take the wheel off to get a decent pic anyway, so you might just find the model on!

also - Owen, are you serious that's all it takes to remove a damper?!?!?

Link to comment
https://www.sau.com.au/forums/topic/400642-new-to-sau/#findComment-6878672
Share on other sites

Alright thanks mate.

Yeah, looking on ebay for a C spanner...I haven't been able to find one locally (not that I have put heaps of effort into looking)

I haven't actually properly looked at the coilovers yet, do they usually have the model visible with the wheel on? Or is it a matter of removing the wheels and getting right into the wheel well to know what model of HKS coilovers they are..

Yeah, I really just want to see how low down it does go haha

Remember if you go low the car becomes a defect magnet and it will also handle worse!

If you change height in any way make sure you get an alignment!

Link to comment
https://www.sau.com.au/forums/topic/400642-new-to-sau/#findComment-6878675
Share on other sites

Remember if you go low the car becomes a defect magnet and it will also handle worse!

If you change height in any way make sure you get an alignment!

Oh how much i've learnt since this post last year!

Worked out they are HKS Hyper-D.

The thread on the coilovers is rusted so cant be lowered without taking the coilover out of the car, which is well effort :)

I've put up a build thread in the projects section!!

Link to comment
https://www.sau.com.au/forums/topic/400642-new-to-sau/#findComment-6879746
Share on other sites

Oh how much i've learnt since this post last year!

Worked out they are HKS Hyper-D.

The thread on the coilovers is rusted so cant be lowered without taking the coilover out of the car, which is well effort :)

I've put up a build thread in the projects section!!

Good work :yes: I love a good build thread :woot:

Link to comment
https://www.sau.com.au/forums/topic/400642-new-to-sau/#findComment-6879786
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...