Jump to content
SAU Community

Recommended Posts

How long will this take? Was planning to do it Monday. Got to be at the boat 18.30. Google maps say a little over 7 hours which I figured I'd better. Local guy I met said Hobart to Strahan alone is 5 hours.....More locals said there might be snow there too and the road closed.

What say you Tassie Crew?

Link to comment
https://www.sau.com.au/forums/topic/401048-hobart-to-strahan-to-burnie-to-dev/
Share on other sites

Mate its a fair haul. From Hobart to strahan is prob gonna be 4 and a half hours at best. At this time of year the road well parts of it anyway are never dry. Even slighty green/mossy in places 7 hours is about right really. The road between Queenstown and Strahan is mega windy. So basically I wouldnt count on doing it quicker but allow for it to be slower, weather could slow you up. Prob will see some snow but doubt it will be enough to close that road, but you never know

Just keep an eye on the weather mate. West coast road is fantastic, east coast is also pretty good. Just beware of the po po on the east coast. There's usually one trolling near the big buckland straight right up to orford. They don't have police on the west coast. It's the wild west.

Cheers for the popo heads up. Whst's the best place for the weather report? BOM or something local? Still keeping an open mind on west coast. If I run out of time I can miss Hellyeah Gorge and Burnie.

Def worth the drive! just give yourself a little more time or some options.

Another thing to add is 98 is pretty scarce on the ground up that way.

As Jack says, west coast is not heavily po po ulated.

Cheers

Justin

OK, weather is at worst wet. Low temps are at around 9 degrees to no chance of snow or ice. I'll have to average 80klms/h including fuels stops to make it. I'll detour via West Coast if I think I'm struggling for time when I get to Queenstown. Fuel is at Rosebery and Strahan too if needed so either way I'm covered. The old Porker is getting 15 l/100 even with hard driving so that's a great relief compared to the GTR....

Big day tomorrow........

good plan, you can change your route multiple times, even if you made it to tullah, then came back over the mountain past cradle.. (good fun) would cut multiple hours off.

The east coast had flooding last couple of days, so the roads probably wont be much good.

Cheers. So by cradle mountain do you mean via Middlesex up to Dev, rather than Bernie to Dev? If so that's about an hour saved, which could be critical. I'd miss Hellyer Gorge but I guess you can't have it all sometimes.

Yep that's exactly what I mean, come down through moina, wilmot, forth and to dev.

From a driving and excitement point of view I'd go that. But that of course is if you aren't doing strahan.

Could call In and do dove lake/cradle if haven't already also.

Edited by jangles

Well I made it. Hobart to Strahan was 3 hours and 18 minutes. Not much traffic on the roads (whistling emoticon). Took another 2 hours and 40 minutes to get from Strahan to Devonport. 6 hours all up. Had a mishap in that my passenger side exhaust fell off.......drove 30 klms with it dragging on the ground (nowhere safe to stop pissing down with rain) before it fell off just as I was pulling over. Damaged the rear bar. Is so loud now I have to wear ear plugs to drive it. I've now got the ferry ride to recover as I'm buggered. Oh, and that was the drive of my life. Utterly sublime. Thanks for your input fellas.

Well I made it. Hobart to Strahan was 3 hours and 18 minutes. Not much traffic on the roads (whistling emoticon). Took another 2 hours and 40 minutes to get from Strahan to Devonport. 6 hours all up. Had a mishap in that my passenger side exhaust fell off.......drove 30 klms with it dragging on the ground (nowhere safe to stop pissing down with rain) before it fell off just as I was pulling over. Damaged the rear bar. Is so loud now I have to wear ear plugs to drive it. I've now got the ferry ride to recover as I'm buggered. Oh, and that was the drive of my life. Utterly sublime. Thanks for your input fellas.

Awesome!! Glad you enjoyed. Good to see you didn't encounter any traffic jams allowing you to make good time! =P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Goon of fortune....go on.....spin to win
    • Oh you'll be surprised how much the motor breathes when it sees nearly 2 bar of boost. That will definitely pop, but for now, more than happy with 99.99% of the crank case fumes and engine shit going back into the intake.
    • You'll likely find, you never really get pressure to pop that valve.  If you are getting "pressure" it's going out the unrestricted hole before it hangs around to build up and pop the rubber flap. IE, it's headed for the intake pipe. In reality, if we did it right, your "vent" would actually go to a PCB valve at the inlet, and you'd still have the two the intake pipe too. When in vacuum, motor sucks it in, when on boost, PCB shut, and you will be getting enough air flow past (if they've put the catchcan pipe on the inlet in a good spot, at the right angle) which will create suction. Current setup in reality, you're just forcing it to the intake pipe.
    • Slightly off topic - I've just wired oil pressure sensor into my LinkECU as well - I tapped into the existing dash cluster oil pressure light wiring, and fed that back into an Auxiliary output in the ECU. That now lets me control the original dash oil pressure light based on a range of conditions triggered by the LinkECU - means the factory light isn't entirely redundant now that the factory oil pressure switch is no longer installed.
    • Hasn't risen high enough on the to do this yet for it to be done lol.  One day it will be done... one day... I know, but I tell myself its ok because I took a heap of temp measurements of the terminals over a 12 or so hour drive, temps were never an issue. Plus I made sure to pat the bulk head and say "she'll be right". So, yep she'll be right lol. 
×
×
  • Create New...