Jump to content
SAU Community

Recommended Posts

6 digit plates don't have to be bent to fit David.

You just need M6 gauge bolts with metal sleeves (as spacers)

Until you find "LAI", just put up with "LAI.469" to bring the lulz

  • 3 weeks later...

6 digit plates don't have to be bent to fit David.

You just need M6 gauge bolts with metal sleeves (as spacers)

Until you find "LAI", just put up with "LAI.469" to bring the lulz

LOL! I actually have another in mind, a 5 digit plate which is only $90 per annum but in no rush, so I will wait it out a bit longer to see if LAI comes up.

BUMP!!!

  • 2 weeks later...
  • 2 weeks later...

Go to the Rta, with a $100 bill and get them to tell you who has it.

Haha, I wish I could. Really do wish I knew someone in the RTA. Found someone yesterday with LA1, almost got out of the car to offer a price before I realized it was a "1" not an "I" :(

If [LA1] has been issued and is currently on a car, then the RTA/RMS will not allow [LAI] plates to be issued. This regulation has been in place for a least 10 years. Same goes for custom plates with the number 0 and letter O. For, eg, [JOE] and [J0E].

So, you should have made him/her an offer on [LA1] :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...