Jump to content
SAU Community

Recommended Posts

Hi Every1,

Was wondering if anybody has the part numbers for what would be known as a 'double din conversion kit' for a R34 GTR?

Interested in how many parts are included in the kit.

I have factory NAV in my GTR, hence why I need it. Wondering whether the air con replacement is a new facia which snaps on to the existing air con control unit, or whether you need to replace the whole thing?

Thanks in advance.

Edited by iwanta34gtr

Its already double din iso ( tiny bit off double din todays standard but not much to worry about )

No kit needed but some trim rings wont fit right without filing the trim ring slightly or some dont need trim ring mounted , only slot the existing holes in the cage holding the radio to set it back a bit further to make it look perfect

Note tape a thick soft towel around the console / gear surround to set the razor sharp cage on or it farks the surround black bits and its near impossible to repair ,

Double din rules fark the single din look is boring

Hello, thanks for your reply.

My car has the NAV unit, I need to convert it to the one like in the pic in the previous post.

Air con controls are one step further down and the NAV unit controls are in its standard place. The air con unit is a little bit smaller than standard.

interior1024x768.jpg

Edited by iwanta34gtr

Its been covered a few hundred times

But you just need the face plate off a newer or gtt , gt model car for the a/c and move it up a spot

The double din cage exists already behind the pocket

The controls fit exactly the same just fills the gap all the way across

The nav wont work here anyhow , the mfd will and can be used still , where are you located

Chris rogers on sau deals a lot with these parts and will help you a fair bit

Mine has ambient air , the newer cars came with it , mine has snow package as well , heated mirrors , sunroof heater and a super demist function in the control for a/c

i have a few facia's in the shed i'll see if i can find the part # in am

The parts dont have embossed numbers and no stickers?

Pm your email addy and i can send photos to you of what I'm

Talking about ( crappy iphone not able to use flash to upload !!)

And photofark it times out

you only need the plastic face not the guts , it just unsnaps

And you swap them over , screw to cage and back into car screws under mfd

And vents out

Edited by Carbon 34

Yes mate, spot on.

Yea fair enough, mine came with the aircon unit up top so cant help you much there.. i just removed the old single din unit and replaced it with a nice alpine unit.... goes really will with the interior i think.. not cheap though.

you palnning on putting in something like that?

Sorry thats not right

You only need the facia not the whole A/C climate control , gtr and some of the other R34 have ambient air temp sensor as well so you have to be careful which one , the silver knob pushes in on ambient air temp model the other one wont

The sensor is just in front of the lower driver side radiator , a plug with a small item in held out space and held on with 10 mm bolt

You just unsnap the old single din shaped faceplate, unbolt the circle behind the knob first

And slap on the new wider angled one its that easy and bolt on the circle bit and shove the knob back on , its a good time to go change the lights to LED since a lot are burned out and dated looking anyhow

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...