Jump to content
SAU Community

Recommended Posts

Be more than happy to have you guys join us.... An we'll try do the same, I guess we should probably look at a wisemans meet or something so there are twisty roads and it's central, but for now keep on the 17th ;) good to see so much action on SAU lately....

old pac then galston gorge?

im really keen to get a good cruise going on around here, the one out to wooten or whatever?.. everyone is abit busy over the next month arent they?

and maitland thing is on what 26th? are people keen to actually do this?

Last big run we did was old PAC, Galston gorge then Putty Rd, 2 tanks of fuel, cracked windscreen and paint hammered!!! Was awesome.... :D

August is stuffed mate, let's set a firm date in say 6 weeks or something?

Being difficult to annoy people is one of my goals in life.

Not to sure - should be fully tuned by then. I'll find out more next week.

I definatly can't make the 8/9, but you guys don't have to work around me. I'll prob be saying come for an impromtue cruise as soon the cars running anyway.

Edited by wedge_r34gtr

morning newcastle :P

yeah 8/9th might be a little better for me, got some family thing organised the weekend before i think?? cant remember if i forget about it ill come cruise :)

and matt BAKEDDILDO made me laugh so hard that my boss came out to see what the fuss was :P

Morning ya crazy kid...

Well we have a bit of time to make a decision, so once we get more feedback we can :D

I know right, Benji needs to put in a name change request...... But it needs to be BAKEDDILDO RACER now as he is a track warrior! :laugh:

Seeing as I've been busting my ass since Wednesday definitely.

But I cant do anything today or tomorrow :( busy and parents/ emmas parents coming up so need to entertain them.

Though will still be boozed hah

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...