Jump to content
SAU Community

Recommended Posts

Oh btw, going to look at that clean white 33 in Newcastle sarvo :)

Nice man.

and that ferry the ramps are steaper then they look in thoes pic's i lived down there for like 4 yrs boat access only. You could do a run down to Pie in the sky and eat there but that may not be long enough for you guys, ill be joining the pack around gosford on the way through.

My Godzilla will take its 1st breath on the new engine this week and be ready next week, i just hope she still spits flames once its rebuilt it scares the shit out off ppl when u go from 1st to 2nd and spit going down the main street in gosford hahhaha.

fair call on the ferry.. im still happy to make a split meeting point for the people who want to go the ferry route?...

all that sounds good though mate.

no vcam for my car, can find areas to better spend money.

update on my ecu.. its basically been chipped by a company in japan that there is about 1 licence in aus to tune it haha.. so i will be going for the haltech :) and i got the ok to have work off too so very happy! my bank account wont be though.

Make sure u keep that ECU you may be able to offload it on here for some good $$$ if its a rare item, btw where was the shop that has the licence to tune it?

Make sure u keep that ECU you may be able to offload it on here for some good $$$ if its a rare item, btw where was the shop that has the licence to tune it?

Yea I'm keeping all stock parts....

The guy that can tune it is up in Brisbane I think from what JEM informed me

Ant, have you considered the HKS V-Cam System..

http://www.hks-power...vcam/index.html

Costs about $7,000 though (not including shipping from Japan)

thats only for the pro system - which that only made 30 off.

the step 1/2 versions are ~ 4000. You can also buy some of the parts seperate, which can make it cheaper, depending on the whats is trying to be acheived.

Most of the decent builders/tuners in australia have there own setup by modifing the neo intake gear to run on the rb26 head - alot cheaper :-) Mine will be possible getting this next year, depending on how responsive my final setup is.

Edited by wedge_r34gtr

Aww but sky wants to go on a boat ride!!

f**k you stance phags.

Haha oh benji please gtfo of thread.

Wish there was a ban from Newcastle section button.

Hahahaha.............. Nice! :P

Park it on top of an R33

fair call on the ferry.. im still happy to make a split meeting point for the people who want to go the ferry route?...

all that sounds good though mate.

no vcam for my car, can find areas to better spend money.

update on my ecu.. its basically been chipped by a company in japan that there is about 1 licence in aus to tune it haha.. so i will be going for the haltech :) and i got the ok to have work off too so very happy! my bank account wont be though.

Nah dont think we should split the group mate, we will just stick together :)

Oh a nice call on the Haltech! You'll be very happy with it :yes:

Interesting about the ECU chip too!

Nice man.

and that ferry the ramps are steaper then they look in thoes pic's i lived down there for like 4 yrs boat access only. You could do a run down to Pie in the sky and eat there but that may not be long enough for you guys, ill be joining the pack around gosford on the way through.

My Godzilla will take its 1st breath on the new engine this week and be ready next week, i just hope she still spits flames once its rebuilt it scares the shit out off ppl when u go from 1st to 2nd and spit going down the main street in gosford hahhaha.

Dont mention pies or Chookie will start drooling.

X26WK.jpg

Hey guys i have a question about the transponder in the R34 GTR keys, my car has a aftermarket immobiliser installed and the original remote is not used, i only have 1 key and 1 remote for the car and i want to get a 2nd key/remote. What i want to know is the transponder in the key, is that still used when an aftermarket immobiliser is installed? and where can i get a 2nd remote for it. and am i better off just going and getting a new immobiliser/alarm put in that i have all the codes/info for and spares.

Hey guys i have a question about the transponder in the R34 GTR keys, my car has a aftermarket immobiliser installed and the original remote is not used, i only have 1 key and 1 remote for the car and i want to get a 2nd key/remote. What i want to know is the transponder in the key, is that still used when an aftermarket immobiliser is installed? and where can i get a 2nd remote for it. and am i better off just going and getting a new immobiliser/alarm put in that i have all the codes/info for and spares.

Because i have NFI i am going with NEW ONE :woot:

The old key may open and close the doors but won't turn the alarm off.

When I put mine in I threw out the old central locking system and fed the new alarm with the original wires. Which is probably what they would of done with you.

To get a new remote you'd need to find out what brand it is and either take it to someone so they can program it, or possibly find a code inside it? It won't be as cheap as it sounds I'm sure. Mr minute may be able to dodgy one up for you for 50 odd bucks???

I'd try mr minute or alike, then get a new one. But if your getting someone to install it it could cost a bit.

It's up to you.

Because i have NFI i am going with NEW ONE :woot:

hahah this guy, i like it.

i think i might call and ask about

http://www.npsonline.com.au/shop/item/4-star-car-alarm-01

this shit seems good, alarm, immob, turbo timer, price seems ok to. I just need to know about the dam key chip thing :domokun:

Oh oh oh J-RAD, Was down talking to Aaron @ Difftrans and he said your fkd :P Said the stock 34 diffs are a waste of space haha

At least i tried!

The old key may open and close the doors but won't turn the alarm off.

When I put mine in I threw out the old central locking system and fed the new alarm with the original wires. Which is probably what they would of done with you.

To get a new remote you'd need to find out what brand it is and either take it to someone so they can program it, or possibly find a code inside it? It won't be as cheap as it sounds I'm sure. Mr minute may be able to dodgy one up for you for 50 odd bucks???

I'd try mr minute or alike, then get a new one. But if your getting someone to install it it could cost a bit.

It's up to you.

Yeh i just got quoted around 1k for a full Viper alarm with turbo timer and immob, but its not a 4 point and the only insurance company that will touch me since im 23 is just car at this stage and they require a 4 point in the car and i now need to find a dam key with a transponder in it and whats even better is i dont have the code for the transponder i hope they can code it off the key i have.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...