Jump to content
SAU Community

Recommended Posts

FYI -

R34 GTR wuith aftermarket immoboliser in most cases still runs NATS which means you need to get the transponder programmed before the key will start the car.

R34 GT-T with aftermarket immoboliser does not need programming and you can get a key cut and it will just turn and start.

Thanks for the info, and welcome to Far North Newcastle :D

FYI -

R34 GTR wuith aftermarket immoboliser in most cases still runs NATS which means you need to get the transponder programmed before the key will start the car.

R34 GT-T with aftermarket immoboliser does not need programming and you can get a key cut and it will just turn and start.

Thanks heaps for that, going to get a key today then ill have it coded when i get the car back :D

well, some think planks of wood if no one has any propper ramps like the ones u use to get cars on the back of a trailer, use them to take out a heap of the angle off the ferry ramp

Martin was all over the planks of wood idea, the ramps are good but unless we get a stagea or a ute to come then they would be too long for all of our cars i reckon!

Martin was all over the planks of wood idea, the ramps are good but unless we get a stagea or a ute to come then they would be too long for all of our cars i reckon!

Not if they are short enough to sit in the boot.

Four short planks would be better than two longs ones and save a bit of time as well

I can still bring timbers and lots of them as well

But I like the idea of making a decision on the day

Not if they are short enough to sit in the boot.

Four short planks would be better than two longs ones and save a bit of time as well

I can still bring timbers and lots of them as well

But I like the idea of making a decision on the day

Well OK, lets go back to Plan A.... Ill set up the cruise including the Ferry based on your wood etc and THEN if we get any epically low cars on the cruise we will make the call on the day! Once again we can always split and meet back on Old Pac but would rather try keep the group together!

Happy to help.

I got one of my keys programmed by a mobile locksmith called Ultimate Lock in Sydney. It was around $100.

Cheaper than Hornsby Nissan. I received the same quote of ~ $180.

And not done by an apprentice ;)

Well OK, lets go back to Plan A.... Ill set up the cruise including the Ferry based on your wood etc and THEN if we get any epically low cars on the cruise we will make the call on the day! Once again we can always split and meet back on Old Pac but would rather try keep the group together!

hey man my wood is always good :3some:

Ok just bought the new key, will have it coded once i get the car back, then ill sort out the immobiliser, atleast ill have a spare key now :yes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...