Jump to content
SAU Community

Recommended Posts

FYI -

R34 GTR wuith aftermarket immoboliser in most cases still runs NATS which means you need to get the transponder programmed before the key will start the car.

R34 GT-T with aftermarket immoboliser does not need programming and you can get a key cut and it will just turn and start.

Thanks for the info, and welcome to Far North Newcastle :D

FYI -

R34 GTR wuith aftermarket immoboliser in most cases still runs NATS which means you need to get the transponder programmed before the key will start the car.

R34 GT-T with aftermarket immoboliser does not need programming and you can get a key cut and it will just turn and start.

Thanks heaps for that, going to get a key today then ill have it coded when i get the car back :D

well, some think planks of wood if no one has any propper ramps like the ones u use to get cars on the back of a trailer, use them to take out a heap of the angle off the ferry ramp

Martin was all over the planks of wood idea, the ramps are good but unless we get a stagea or a ute to come then they would be too long for all of our cars i reckon!

Martin was all over the planks of wood idea, the ramps are good but unless we get a stagea or a ute to come then they would be too long for all of our cars i reckon!

Not if they are short enough to sit in the boot.

Four short planks would be better than two longs ones and save a bit of time as well

I can still bring timbers and lots of them as well

But I like the idea of making a decision on the day

Not if they are short enough to sit in the boot.

Four short planks would be better than two longs ones and save a bit of time as well

I can still bring timbers and lots of them as well

But I like the idea of making a decision on the day

Well OK, lets go back to Plan A.... Ill set up the cruise including the Ferry based on your wood etc and THEN if we get any epically low cars on the cruise we will make the call on the day! Once again we can always split and meet back on Old Pac but would rather try keep the group together!

Happy to help.

I got one of my keys programmed by a mobile locksmith called Ultimate Lock in Sydney. It was around $100.

Cheaper than Hornsby Nissan. I received the same quote of ~ $180.

And not done by an apprentice ;)

Well OK, lets go back to Plan A.... Ill set up the cruise including the Ferry based on your wood etc and THEN if we get any epically low cars on the cruise we will make the call on the day! Once again we can always split and meet back on Old Pac but would rather try keep the group together!

hey man my wood is always good :3some:

Ok just bought the new key, will have it coded once i get the car back, then ill sort out the immobiliser, atleast ill have a spare key now :yes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...