Jump to content
SAU Community

Recommended Posts

CP forged 86.5mm 1000HP manly rods and a tomei head gasket.

you should be sweat to ~800hp than :-) - BTW Did they grout the block?

Upgrade oil system for insurance, get some head work for response :-)

Its tuned on an incoming tide :laugh:

LMFAO FOR AN EXTRA 50 AT THE RUDDER KW

you should be sweat to ~800hp than :-) - BTW Did they grout the block?

Upgrade oil system for insurance, get some head work for response :-)

yeh oil system has been done, sump and cam baffles, oil restrictor, OEM GTR oil pump with upgraded pump gears to make sure they dont crack.

Im not 100% on the block i know they have had to bore it out to fit the pistons and then everything else that goes with doing that, ill have to speak to the guys at the shop to find out everything they did to it.

as far as the head goes i have NFI atm keep in mind im not a mechanic by anymeans and im just learning how all this stuff works now, i have been told the head had more damage then 1st thought and has had to have some more work done at the machine shop then they thought it would.

BTW found u a box

http://www.skylinesa...s-of-256-parts/

and i got some more info on the Varestone rims also

http://www.varrstoen.com.au/shop/2-2-1-wheels/2-2-1-rims-wheels-18i

they clear brembos with ease no issues, one of my m8s in SA said the local boys run them on there drift missles.

Edited by T4NK

Nice, now u just need to find me a set of Volk GTC in 18x10j +12 for uner 2.5k :yes:

Im so torn on what rims to get one day i want GT-C the next i want TE-37 the next i want some random set of work rims, FML

Edited by T4NK

Nice, now u just need to find me a set of Volk GTC in 18x10j +12 for uner 2.5k :yes:

Who said i was returning the favour :O haha

That would look good, what colour you looking for?

Who said i was returning the favour :O haha

That would look good, what colour you looking for?

in the Volk GT-C gold center chrome dish, there is a few sets going around but they are all stagerd fitments

in the TE-37 White or bronze

in the random Works white or bronze again.

If only these where +12

http://www.importmonster.com.au/shop/product_info.php?cPath=40_45&products_id=1296

Edited by T4NK

i think the rim you have currently on the car look pretty smick.

Yeh i dont mind them but they are a POS to clean, they have heaps of tight spots in them and i know 1 of the rear rims is buckled, i may look into the cost to have them fixed and get some center caps

BTW they appear to be GTR Nur spec Enkei NT03-M rims, i have never seen another set of them in my life, they have GTR NUR stamped around the center hub and are identical to these

http://www.enkei.com/nt03m.shtml

http://www.ebay.com/itm/LIMITED-EDITION-ENKEI-NT03-M-18x9-5-27-5X114-3-PURE-WHITE-EVO8-9-X-FD3S-SUPRA-/261068728160?pt=Motors_Car_Truck_Parts_Accessories&hash=item3cc8e8a760&vxp=mtrIm

considering a set of these in white, for 2k i can get a full set, with caps and lock nuts posted to me using DHL

http://www.perfectru...result_mode=qui

Edited by T4NK

oh em gee!! thats so kewl.

wonder how much aca will pay me for the vid if i say its a 40 zone?!

I will tell them i was doing 40 and you were dangerous driving at 10 and going to cause an accident :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
    • Yes it is ATF. I quote @Duncan "it takes a good synthentic auto trans fluid like Castrol Transmax Z" It's not a diff. It's a transfer case. Totally different thing. Yes, fluid will come out the sender hole. No you do not really need to drain it. Just pull the old, quickly poke the new, clean up and top up. But realistically, you should probably take the opportunity to change it anyway.
    • Hey all. I’m looking on replacing my speed sensor on my R33 GTR. Will the center differential need to be drained, and if so, the center diff uses ATF fluid D? I found information on the transmission, front diff and rear diff. Can’t find a for sure answer for the center diff. Any help will be greatly appreciated.
    • I would tend to agree, especially based on the transfer oil being completely cooked by the sounds of it. I bet it was serviced every 5,000km... Which probably worked out to once every 15,000 real kms...
×
×
  • Create New...