Jump to content
SAU Community

Recommended Posts

Hey guys!!!! I'm sorta back :D

The thread is TL DR so someone will need to catch me up, although i know we have Trike warriors and cars being completed..... Martin the trouble make is back and Chookie is getting more ink?

Oh and a swear i saw Captain Natro in here too?

Saved a fair bit of money from the stupid Ocsober thing so far so it will go towards tyres and oil cooler for the nats......... Oh and buying a 3082 as a backup for my turbs!

Well just as i suspected, the GTR has been delayed again, this time the tomei gasket kit is not in stock, so it wont be ready till monday/tuesday next week and im in orange all week, so im going to have to pick it up friday arvo when i get back from orange, then i can give it a drive to and from work on saturday and then the cruise is sunday, so ill be taking a fresh engine on this run, 2 days out of the shop. So i wont be doing any crazy pull sor anything so ill probs take up the rear as ill be going very easy on her.

Well just as i suspected, the GTR has been delayed again, this time the tomei gasket kit is not in stock, so it wont be ready till monday/tuesday next week and im in orange all week, so im going to have to pick it up friday arvo when i get back from orange, then i can give it a drive to and from work on saturday and then the cruise is sunday, so ill be taking a fresh engine on this run, 2 days out of the shop. So i wont be doing any crazy pull sor anything so ill probs take up the rear as ill be going very easy on her.

Ill pick it up and bed it in........ Hows the clutch :ph34r:

Lol sounds like a bit to much for me anyways

With stock low mount manifold and piss ant exhaust etc on pump fuel i doubt its making that power, and low mounting a GT35 is a bit suss?

AND 500rwhp is roughly what i have NOT 400kw as Mr NPC said :P

Lol, new ad -

http://www.skylinesaustralia.com/forums/topic/411372-monster-r33-for-sale/page__fromsearch__1

Dunno what old mate was on about, he said plazmaman cooler not plenum lol BUT would like to see what it needs for 1000rwhp :laugh:

Well just as i suspected, the GTR has been delayed again, this time the tomei gasket kit is not in stock, so it wont be ready till monday/tuesday next week and im in orange all week, so im going to have to pick it up friday arvo when i get back from orange, then i can give it a drive to and from work on saturday and then the cruise is sunday, so ill be taking a fresh engine on this run, 2 days out of the shop. So i wont be doing any crazy pull sor anything so ill probs take up the rear as ill be going very easy on her.

Not sure if I posted this here or another thread but have a read and then see if you wan to take it easy still, best way to glaze the bores and kill the rings is to take it easy in my opinion

http://www.mototuneusa.com/break_in_secrets.htm

Have run in plenty of engines by loading them up first run and never had any dramas

If the shop has a dyno maybe they can run it in on the dyno for you before you pick up the car

Not sure if I posted this here or another thread but have a read and then see if you wan to take it easy still, best way to glaze the bores and kill the rings is to take it easy in my opinion

http://www.mototuneu..._in_secrets.htm

Have run in plenty of engines by loading them up first run and never had any dramas

If the shop has a dyno maybe they can run it in on the dyno for you before you pick up the car

well if this is the case im sure my mechanic will run it on his dyno b4 he gives it to me, im going to wait to see what he tells me what he wants to do with it as he is the one offering warranty on it if something goes wrong. If he wants me to smash it then get out of my way GTR coming through and ill see u guys at berowra as ill need the wood ramps to get on the ferry :woot:

well if this is the case im sure my mechanic will run it on his dyno b4 he gives it to me, im going to wait to see what he tells me what he wants to do with it as he is the one offering warranty on it if something goes wrong. If he wants me to smash it then get out of my way GTR coming through and ill see u guys at berowra as ill need the wood ramps to get on the ferry :woot:

Haha ya clown ;)

Yeah most modern rings bed in pretty quickly....He will tell you what to do!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
    • Yes then it will turn on but I want the car features to work  
    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
×
×
  • Create New...