Jump to content
SAU Community

Recommended Posts

Hey mat,

Emma has told me her dad won't be in gosford for the night before Wakie! Do younknow if there's any vacant places for Thursday night???

Ruxis, just do an early morning run to Wakie...

Theres bugger all traffic at 4am in the morning, you'll hit sydney at 6am, miss most of the traffic when the sun is rising and get to Wakie by 8ish.

Thats probably when I'm leaving. The old man is probably tagging along with me to come spectate, he used to have a stack of old cars like a couple of worked LJ Torana's, VK Group A Brock Commodore etc...wish he didnt sell them. He's even been talking that he wouldnt mind doing a track day in the S15 haha.

Also, found out my aunty sold an immaculate 260z (with original bonnet scoop - rare as f**k) for $2000 several years ago because it had engine problems. Facepalm.jpg. My uncle did something similar when he sold his SLR5000 Torana for bugger all (ages ago due to packing the shits from getting hassled/defected by the police all the time).

Moral of the story, don't sell nostaglia vehicles, HOLD ON TO THEM haha.

Could do man but that's f**kin early to then race around all day and I'm only going for the Friday.

I could stay with my folks but that's a 3 hour drive still. Suppose leaving at 5 isn't to bad.

See what happens. Could even stay at a town near ghoulburn

Don't want to modify the stock rail to get my larger bore injectors in - so i'm ordering a 11mm billet rail.

Just wanted to know if the stock regulator can be removed so i can reuse it or if i had to get a new one. Been in the middle of butt f*ck know where atm, i can't just go look at the car to find out ...

Ohhhh.... Aftermarket are cheap enough if you cant use it anyway man!

Hey mat,

Emma has told me her dad won't be in gosford for the night before Wakie! Do younknow if there's any vacant places for Thursday night???

As in motels etc? Should be plenty man! Jump on Wotif and have a look, should be able to get a cheap room for a night with a park for the car etc........

Could do man but that's f**kin early to then race around all day and I'm only going for the Friday.

I could stay with my folks but that's a 3 hour drive still. Suppose leaving at 5 isn't to bad.

See what happens. Could even stay at a town near ghoulburn

I think the adrenalin from racing around the track will keep you going haha.

Matt, I've sent you a PM

and just realised you have organised someone to do the paint, so my PM will be irrelevant haha!

Yeah all good! Thanks for trying tho.........

Yep fouled plugs will give you a nice miss as you come on boost.

i'd be asking y did they foul too! you may be running rich down low - i.e. time for new o2 sensors.

Edited by wedge_r34gtr

Yep fouled plugs will give you a nice miss as you come on boost.

i'd be asking y did they foul too! you may be running rich down low - i.e. time for new o2 sensors.

Yeh they cleand everything out cleanded the AFM out she kicks even harder then before now its a joke i cant move in my seat when boost comes on and its only putting out .9bar

LOL

that happens.

keep an eye on the plugs. if it happens again, then the original issue hasn't been solved.

Or they forgot to install rings :ph34r: lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...