Jump to content
SAU Community

Recommended Posts

can anyone with a 34 GTR please confirm for me if the following plug should be plugged into anything, my mechanic seems to think the 02 sensors are fine, he thinks the cause is the oil in the intake pipe getting on the AFM causing it to not read properly and to fix this i need to change the turbos out............... im not to sure what to make of that tbh

post-83784-0-45280900-1351547577_thumb.jpg

Is the car missing or is it just a boost problem?

if its AFM it should be running like shit and missing here and there i would have thought?

if its just not boosting sounds like a leak someone? maybe in the inlet manifold or something if its still registering boost?...

im not mechanic, just thoughts..

also if alot of oil is around the AFM.. could mean new turbos.. leak on the inside somewhere?...

If your talking about the plug near the twin turbo pipes yes it should be plugged in. Its either one of your AFM plugs or o2 sensors plugs.

If one of Your AFMS isn't plugged in, then this would explain your preiodic boost.

A little bit of oil residue in your pipes is normal - any running/pooling oil isn't and is a sign your turbos seals are shagged.

AFM's do funny things - particualry if there on the way out (i.e. speratic voltage reading). Down low they aren't really doing much, up high on the other hand....

Edited by wedge_r34gtr

AFM's do funny things - particualry if there on the way out (i.e. speratic voltage reading). Down low they aren't really doing much, up high on the other hand....

Mine did a funny thing............................................................................................................................................. It went in the bin and i laughed! :laugh:

Mine did a funny thing............................................................................................................................................. It went in the bin and i laughed! :laugh:

yea my car runs much better without them too.. but i did still leave them attached to the engine!

Mine did a funny thing............................................................................................................................................. It went in the bin and i laughed! :laugh:

LMFAO THIS GUY BAHAHAHAH

Yeh i was like dafuq is this plug for?????? the oil is all the way to the airbox, my mechanic changed the plugs cleaned the AFM and it boosted and ripped then like 40km later it stopped boosting again, it misses as it hits boost and boost does not come on but the MFD is reading boost to .9 bar :woot: so its all spooling and shiz. i have 2 plugs that are taped togeather behind the twin turbo pipe and 1 is plugged in and 1 is not.

Well mine is suposed to be a farking specialist who has worked on these many times....... Team K Kustoms did the work the motor runs realy well the build is great on it even without it boosting properly it still has shit loads of power, im waiting on a call back from him atm, my main issue is the 20L of fuel it used to do 75km on the way to work.....

i might try unplugging the AFM and see if it runs without them and comes on boost, after he cleaned them and changed the plugs yesterday it went like a rocket, he thinks the turbos may be spitting oil back up the intake pipes and coating them in shit so they are not reading correctly.

Edited by T4NK

yea see what your guy says...

i cant imagine it would run too well unplugging the AFMs...

Does it have an aftermaket ecu? was it tunned after the build? sounds like it is running very rich....

yea see what your guy says...

i cant imagine it would run too well unplugging the AFMs...

Does it have an aftermaket ecu? was it tunned after the build? sounds like it is running very rich....

stock ecu, not sure how much u can tune a stock ecu.... well if it will come on boost with the AFM off then i know thats the issue and i just have to work out why all this oil is in the pipes

yea cant tune stock 34r ecus.. mine had a custom chip installed onit that was very rare that could be tuned, but there arent really any people who tune it anymore so its pretty useless.. ive got a haltech running via MAP now.. much better!

yea a large amount of oil sounds bad.. maybe check pipes on the other side to see if there is more up near the inlet etc?..

The soldering joins on my Afm f**ked up when I cleaned it. Can't remember what happened though... Not it either wouldn't start or revs were bouncing all over I can't remember. But as Joel said it could do funny things when on boost because more air more volts and boom.

I would only be touching what your mechanic says dude. If you f**k something it's bye bye warranty.

ATM it's his job to fix it not yours

The soldering joins on my Afm f**ked up when I cleaned it. Can't remember what happened though... Not it either wouldn't start or revs were bouncing all over I can't remember. But as Joel said it could do funny things when on boost because more air more volts and boom.

I would only be touching what your mechanic says dude. If you f**k something it's bye bye warranty.

ATM it's his job to fix it not yours

Yeh he told me to give the pipes a clean and the AFM to with the spray can cleaner, at lucn im going to get some paper towels and open the pipe and give it a wipe down around the AFM i dont have the tools to get to the one under the airbox, might have to park the car up at home and get the train for the rest of the week.

yea my car runs much better without them too.. but i did still leave them attached to the engine!

Proven 6% better flow when you gut them. DONT GUT WORKING MAF's THOUGH!!!!

This pic lets you see the plug better btw.

Follow the lead - where does it go? it's definatly o2 or MAF though and the other end should be around that location somewhere.

Did someone say dash 7s??

Just keep modifying until it's fixed IMO :)

This man nailed it

If in doubt MOAR boost! :woot:

The answer to everthing in life. More boost.

If in doubt - 30+psi and RWD is the answer.

Edited by wedge_r34gtr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...