Jump to content
SAU Community

Recommended Posts

If anyone's keen, thinking about going for a drive to check out some roads today...

The route from newy is approx 300kms and will take 4-5hrs ha...

Going around gresford, dungog and further north

If anyone's keen, thinking about going for a drive to check out some roads today...

The route from newy is approx 300kms and will take 4-5hrs ha...

Going around gresford, dungog and further north

Just saw this now so probably to late to get a lift in Big Bird

Well back from the mechanics, and the verdict is as he thought, turbo leaking oil into the intake, messing up the AFM, causing it to missfire dump fuel and foul the plugs, fix is replace turbos.

And also with the stock GTR air box and the side pipe, it is used for induction but its blocked off standard, it has 2 pressue clips and the restrictor pops out to give u massive air flow, i can hear my car sucking in more air and its fluttering also now that i have taken it out pics are attached.

post-83784-0-80871300-1351916762_thumb.jpg

Sucks tank, thoughts on turbo??

Probably -7s

https://www.justjap....569&cat=&page=1

2nd hand or if i can get a new set for a good price.

Its something like that or put a set of good stock ones back in it and probably sell it get as much back as i can on it and move on.

Edited by T4NK

T4NK, I have a contact in Japan that you can use to get your parts....

You can get stuff a lottttt cheaper than from JustJap....

For example: I got my Tomei N2 Oversize Oil Pan for $350 incl.postage and JustJap sells them for $800ish.

All the stuff Ive bought has worked out cheaper than Nengun + RHDJapan as well

Probably -7s

https://www.justjap....569&cat=&page=1

2nd hand or if i can get a new set for a good price.

Its something like that or put a set of good stock ones back in it and probably sell it get as much back as i can on it and move on.

That's a lot of coin for turbos

Have you looked at getting yours redone?

http://www.digi-hardware.com/index.html

Might be cheaper with the same result but as the saying goes costs nothing to ask.

Don't sell the car man unless it's to Jarred when he has the coin :)

T4NK, I have a contact in Japan that you can use to get your parts....

You can get stuff a lottttt cheaper than from JustJap....

For example: I got my Tomei N2 Oversize Oil Pan for $350 incl.postage and JustJap sells them for $800ish.

All the stuff Ive bought has worked out cheaper than Nengun + RHDJapan as well

For once Benji might be onto something here.

First very usefull post I've seen ever from you

Price on some 550cc or higher injectors for a 25NEO please

Oh and have you finished the drive yet Ant?

Hope the car is still in one piece

Was up around Gresford way last week and sections of the road are utter crap.

Apart from the bit between Gresford and Vacy that has a few rises and dips in the road. The truck gets very light in the front end at 100 through that section.

If you went just a bit faster in a car I reckon you could get air easy enough

Found these, talking to the guy atm about shaft play ect, getting some pics and a video of the shafts sent to me since they are in melb, if they are good ill take them i think, 10,000km or less on them

http://www.skylinesa..._1#entry6543765

Edited by T4NK

T4NK, I have a contact in Japan that you can use to get your parts....

You can get stuff a lottttt cheaper than from JustJap....

For example: I got my Tomei N2 Oversize Oil Pan for $350 incl.postage and JustJap sells them for $800ish.

All the stuff Ive bought has worked out cheaper than Nengun + RHDJapan as well

If you can get a price for me posted that would be great to. thanks :yes:

haha martin 34s are way to over priced for me but thanks for looking out for me bruv

the run was pretty shit but we got good pics of the bird and saw some great scenery, wooten way is our cruise after the next one.

what would you buy tank?? never know it could be great after the turbo and be worth keeping

not sure m8, was considering a TRD chaser or even just a GTT 34 something thats not as expensive to fix when i brake it, cauz i know im going to brake it lmfao

Yea sorry Martin were abit late, we were on the road by 1030...

Roads were very rough, therefore very slow! There was one good section from dungog over to buckets way, but apart from that, wooten was great! Smooth and very wide, and 100kph speed limit and no other cars on the road.

Will hit it up for the next run.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...