Jump to content
SAU Community

Recommended Posts

EOI at this stage but lets say $11,000 to take it home.

Car is engineered however is now defected as of 2 weeks ago.. :( can assist with the removal of defect however im selling as i just dont have time or room.

Engine:

RB25 series 2 motor (94,000Kms)

TD06/20g 8cm rear

Plazmaman Plenum

Plazmaman throttle body

Splitfire coilpacks

Big Injectors

BMI fuel Rail

Front Mount

52mm Radiator

Oil Cooler and relocation Kit

Tial 44mm External Gate

r33 clutch master

Catch can

3.5inch kakimoto exhaust

Custom Front/Dump pipe

Greddy Swirl Pot

Fuel Pressure Regulator with Gauge

Big Fuel Pump (unknown brand)

Interior:

Profec B Spec 2 controller

Adaptronic computer

Greddy turbo timer

Bride door trims

Autometer Phantom Boost gauge

Autometer Phantom Oil Temp gauge

Autometer Phantom Water Temp gauge

Pioneer MVH-8250BT head unit

6x9 in rear

Custom parcel shelf

6inch in the doors

4chan Amp in boot

Suspension/Driveline:

R33 LCA's

ISC N1 coilovers

Adjustable rear camber arms

Bolt in half cage

metal pinapples

mini spool locker diff

Exedy 100kg heavy duty clutch

Strut Braces front and rear

Hicas Removed completely (all lines)

R33 power steering pump

Hicas Lock bar in rear

Wheels/Tyres/Brakes

Varrstoen 2.2.1 (black)

18x9.5 +12 all round

235/45 all round

Slotted Rotors Front

Body:

Vertex Side skirts (sprayed by previous owner and is different colour)

Vertex Rear bar (sprayed by previous owner and is different colour)

Vertex Front bar (currently unpainted)

Genuine GTR front bar (sprayed by previous owner and is different colour) and has had N1 vents cut into it

Car was apparently resprayed 2 years ago?? (seriously bad job at that)

Windows tinted - Rear window all stuffed

there are some things to know about the car as below.

- rear CV's are effed (replacements to go with the car)

- defected 2 weeks ago for most of the stuff that is on the engineers certficate

- rego now due also

- bit of rust on the rear window

Car has also just had a new tune and made another 50wkw across mid range and is awesome fun to drive.

Edited by Frosty

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...